Technical data:

Special drag chain cable for extreme mechanical stresses in accordance with DIN VDE 0285-525-2-31/ DIN EN 50525-2-31 and UL Style 10553
Temperature range moving -30°C to +80°C fixed -40°C to +80°C
Nominal voltage VDE U0/U 600/1000 V UL/CSA 1000 V
Test voltage 3000 V
Insulation resistance min. 100 MOhm x km
Minimum bending radius moving 5x core Ø fixed 3x core Ø
Structure:
Bare copper strand, extra fine wire in accordance with DIN VDE 0295 Cl.6, Sp.4, BS 6360 cl.6 or IEC 60228 cl.6
Core insulation made of thermoplastic polymer, color black or green-yellow
Outer jacket made of special polyurethane, TMPU based on DIN VDE 0207-363-10-2 / DIN EN 50363-10-2
Sheath color: black (RAL 9005) with meter marking
Properties:
flame-retardant, UL VW-1, CSA FT1
halogen-free
low adhesion
abrasion-resistant
very good oil
resistance very good alternating bending strength
very high resistance to mechanical stress
higher notch toughness
ozone and UV resistant
coolant resistant
The materials used in production are silicone and cadmium-free and free from substances that impair paint wetting
Notes:
shielded analog type: MULTISPEED 600-C-PUR-J/-O
Use:
This special drag chain cable allows continuous use under extreme requirements with free movement without tensile stress and without forced movement guidance. For installation over long travel distances and at high speeds in dry, damp and wet rooms, as well as outdoors. These are used in particular wherever the highest demands are placed on flexibility, abrasion resistance, ozone and chemical resistance. For applications that go beyond standard solutions (e.g. composting plants or high-bay conveyor systems with extremely high travel speeds, etc.), we recommend that you use our specially developed questionnaire for energy guiding systems. For use in energy guiding chains, please observe the assembly instructions.
Standard lengths: 100 m, 500 m, 1000 m.
Technical changes reserved.