Technical data:

Fluoropolymer insulation FEP
Temperature range -100°C to +205°C (briefly +230°C)
Conductor temperature ranges bare copper +130°C tinned copper +180°C silver-plated copper +200°C
Nominal voltage 600 V
Test voltage 2500 V
Insulation resistance min. 2 GOhm x km
Minimum bending radius moving 15x cable Ø fixed 4x cable Ø
Radiation resistance up to 1x106 cJ/kg (up to 1 Mrad)
Structure:
Bare copper strand, tinned, silver-plated in accordance with DIN VDE 0295 cl.5, fine-stranded, BS 6360 cl.5, IEC 60228 cl.5
Core insulation made of FEP-HELUFLON
Core marking in accordance with DIN VDE 0293-308 - up to 0.25 mm² Cores colored - from 0.5 mm² Black cores with continuous white numbering
Cores stranded in layers with optimal lay lengths
Outer jacket FEP-HELUFLON
Jacket colour: black (RAL 9005)
Properties:
High insulation resistance
Minimal dielectric losses
Non-flammable
Resistant to microcultures
Does not allow fungal growth
Completely ozone-resistant
Absolutely weather-resistant
Water absorption <0.01%
Minimal water vapor permeability (approx. 0.18 mgr/cm² in 24 hours)
The materials used in production are silicone and cadmium-free and free from substances that impair paint wetting.
Tests:
self-extinguishing and flame-retardant in accordance with DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1
Use:
Is mainly used for installation in control cabinet construction with extreme heat generation or in ovens, brickworks, heating devices, kitchen systems, measuring devices, etc. as well as in the chemical industry, as it is absolutely flame-retardant, resistant to acids, alkalis, solvents, oil and petrol.
Standard lengths: 100 m, 500 m, 1000 m
Subject to technical changes.