Technical data:

Special drag chain cable for extreme mechanical stresses in accordance with DIN VDE 0285-525-2-51 / DIN EN 50525-2-51, according to UL Std.758 AWM Style 21179
Temperature range moving -5°C to +80°C fixed -30°C to +80°C
Nominal voltage VDE U0/U 300/500 V UL 600 V
Test voltage 3000 V
Minimum bending radius moving 7.5x cable Ø fixed 4x cable Ø
Structure:
Bare copper strand, fine-wire Unilay with short lay lengths
Core insulation made of special PP
Core identification according to DIN VDE 0293 Black cores with continuous white numbering
Stranding: < 7 cores: with optimal lay length, due to the design around a filler element, stranded in one layer = 7 cores: Cores stranded with optimal lay lengths in a bundle construction, torsion-free stranding with coordinated short lay lengths around a filling element
Outer jacket made of special PVC, particularly fatigue-resistant, extruded to fill
the gussets Jacket color: black (RAL 9005) with meter marking
Properties:
The materials used in production are silicone and cadmium-free and free from substances that impair paint wetting
Tests:
PVC outer jacket self-extinguishing and flame-retardant in accordance with DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1, UL VW-1, CSA FT1
low adhesion
ozone and UV resistant
very good alternating bending strength
longer service life due to low friction resistance
better chemical resistance
oil-resistant in accordance with DIN VDE 0473-811-404/ DIN EN 60811-404
reduced in Ø, thus lower moving masses
Notes:
shielded Analogue type: MULTISPEED 500-C-PVC UL/CSA
Use:
UL/CSA approved HELUKABEL MULTISPEED 500-PVC is used when extreme demands are placed on the cable. Designed for export-oriented machine builders, especially for the USA and Canada. Coordinated materials and stranding techniques allow continuous use as a highly flexible drag chain cable with long travel distances and high or slow speeds. For installation in dry, damp rooms and outdoors, with free movement without tensile stress and without forced movement control as a highly flexible PVC control cable suitable for frequent lifting and bending stress in machine and tool construction.
Standard lengths: 100 m, 500 m, 1000 m
Subject to technical changes.