Technical data:

Special polyurethane hose cable based on DIN VDE 0285-525-1 / DIN EN 50525-1
Temperature range moving -20°C to +80°C stationary -40°C to +80°C
Nominal voltage U0/U 300/500 V
Test voltage 4000 V
Breakdown voltage min. 8000 V
Insulation resistance min. 20 MOhm x km
Minimum bending radius moving 10x cable Ø stationary 5x cable Ø
Radiation resistance up to 100x10 made of copper wrapping, coverage approx. 85%
Fleece wrapping ensures good sheathing stripping
Outer sheath gray made of special full polyurethane TMPU according to DIN VDE 0207-363-10-2/ DIN EN 50363-10-2
Sheath color gray (RAL 7001) with meter marking
Properties:
Suitable for laying outdoors and resistant to UV rays, oxygen, ozone, hydrolysis and microbes
low adhesion
The materials used in production are silicone and cadmium-free and free from substances that impair paint wetting
Notes:
unshielded analogue type: PURö-JZ-HF
Use:
Extremely robust control cable which is characterized by high abrasion resistance and notch toughness. Due to the resistance to mineral oils, especially to coolant emulsions, it is used in machine, tool and plant construction, in rolling mills and steel works in particularly critical areas. Can be laid quickly and safely due to the good flexibility. Due to the high abrasion resistance and small bending radius, it is ideally suited for use in drag chain systems. These shielded cables are ideally suited for interference-free data signal transmission for measurement, control and regulation technology. For applications that go beyond standard solutions (e.g. composting plants or high-bay conveyor systems with extremely high travel speeds, etc.), we recommend that you use our specially developed questionnaire for energy guiding systems. For further application parameters, see the selection table: Cables for energy guiding chains in the introduction. For use in energy guiding chains, please observe the assembly instructions. EMC = Electromagnetic compatibility To optimize the EMC properties, we recommend contacting the copper shield on both sides and over a large area all around.
Standard lengths: 100 m, 500 m, 1000 m
Subject to technical changes.