Helukabel 12871, EAN: 4060892055614

Helukabel 12871 control cable 3G 1.5 black

Cables > Halogen-free cables and wires > Control cables halogen-free

Helukabel 12871 control cable 3G 1.5 black

Lieske Part No. 331543
Mfg Part No 12871
EAN-Code 4060892055614
Manufacturer Helukabel
Here only 3,87 EUR
4,61 EUR incl. VAT

Further information for Helukabel 12871 control cable 3G 1.5 black

General
Degree of protectionhalogen-free
Temperature range in motion-15 °C
Temperature range, non-operating-40 °C
Rated voltage U0/U0,6/1 kV
Test voltage4000 V
Coupling resistance250 Ohm/km
Minimum bending radius moving15 x conductor Ø
Minimum bending radius not moved7,5 x conductor Ø
Radiation resistance100x106 cJ/kg
Wire insulationHalogen-free polymer
Conductor markingblack conductors with white digit print
Shield braidtinned Cu wires, 85% coverage
Outer sheathHalogen-free polymer
Sheath colourBlack RAL 9005
MaterialsSilicone- and cadmium-free, free from substances interfering with paint adhesion
Flame testDIN VDE 0482-332-3-24 / BS 4066-3 / DIN EN 60332-3-24 / IEC 60332-3-24
Corrosivity of fire gasesDIN VDE 0482-754-2 / DIN EN 60754-2 / IEC 60754-2
Halogen-freeDIN VDE 0482-754-1 / DIN EN 60754-1 / IEC 60754-1
Smoke densityDIN VDE 0482-1034-1+2 / BS 7622-1+2 / DIN EN 61034-1+2 / IEC 61034-1+2
Regulation lengths100 m, 500 m, 1000 m
ApplicationMeasurement, control and signal cables in machine tools, conveyor and transfer systems, production lines, plant engineering, climate technology, metallurgical and steel rolling mills
InstallationFixed or flexible installation, occasional free movement without tensile stress
Environmental conditionsdry, damp, wet, outdoor (fixed installation), on plaster
EMCHigh shielding density, double all-round contact recommended
Conductor constructionBare Cu stranded wire, DIN VDE 0295 class 5, fine-stranded
Core arrangementtwisted in layers with optimal lay lengths
Meter markingYes
Self-extinguishingYes
Flame retardantYes
Inner sheathYes
The control cable JZ-600 HMH-C 3G 1.5 from Helukabel, type 12871, is a halogen-free, flexible control cable manufactured in accordance with the standards DIN VDE 0285-525-2-51 / DIN EN 50525-2-51 and DIN VDE 0285-525-3-11 / DIN EN 50525-3-11. It is suitable for use in industrial plants, particularly as a measurement, control, and control cable in machine tools, conveyor and transfer belts, production lines, plant engineering, climate technology, and in steelworks and rolling mills. The cable is designed for fixed installation or flexible application, where free, occasional movement occurs without forced guidance and without tensile stress, and is used under moderate mechanical stress. It is suitable for use in dry, damp, wet rooms, outdoors (fixed installation), and on plaster.

Applications

The cable is used in industrial environments where reliable signal transmission under moderate mechanical load is required. It is particularly suitable for plants where high EMC (Electromagnetic Compatibility) is required, such as in manufacturing technology or automation technology. Its use in climate technology and steelworks demonstrates its robustness against various environmental conditions.

Functions and Equipment in Detail

The cable features a bare Cu conductor, manufactured according to DIN VDE 0295 class 5, fine-stranded, BS 6360 class 5, and IEC 60228 class 5. The core insulation consists of a halogen-free polymer, ensuring that the cable does not release harmful halogen compounds in case of fire. The core identification follows DIN VDE 0293 with black cores and continuous white digit printing. The cores are stranded in layers with optimal lay lengths, ensuring even distribution of mechanical stress. An inner sheath protects the cores, and a shielding braid made of tinned Cu wires with a coverage of approximately 85% ensures high shielding density. The outer sheath is also made of halogen-free polymer and is black in colour (RAL 9005), with a meter marking.

Technology Explained Simply

The rated voltage is U0/U 0.6/1 kV, meaning the cable is designed for an operating voltage up to 1 kV. The test voltage of 4000 V serves for safety testing. The coupling resistance is limited to a maximum of 250 Ohm/km, ensuring good electrical conductivity and low signal loss. The minimum bending radius is 15 times the cable diameter for flexible installation and 7.5 times for fixed installation, ensuring flexibility during installation. Radiation resistance up to 100x106 cJ/kg (100 Mrad) makes the cable suitable for applications where ionizing radiation may occur. The materials used are silicone- and cadmium-free and free from substances that interfere with paint adhesion, enhancing processability and environmental compatibility.

Compatibility and Accessories

The cable is manufactured in accordance with the mentioned standards and thus meets the requirements for halogen-free, flame-retardant control cables. The unshielded analog type is JZ-600 HMH. For optimizing EMC properties, bilateral and extensive all-round contact of the copper braid is recommended. The cable is suitable for use in dry, damp, wet rooms, outdoors (fixed installation), and on plaster.

Installation and Mounting

Installation must consider the minimum bending radii: 15 times for flexible installation and 7.5 times for fixed installation of the cable diameter. The cable is designed for free, occasional movement without tensile stress. The meter marking facilitates length measurement and positioning. The recommended all-round contact of the shielding braid improves EMC properties.

Operational Advantages

The halogen-free design ensures lower smoke development and prevents the release of harmful gases in case of fire. The flame-retardant and self-extinguishing properties according to DIN VDE 0482-332-1-2 and -3-24 increase fire safety. The high shielding density of the copper braid ensures interference-free signal transmission. The materials are free from substances that impair paint adhesion, improving processability. The cable is designed for a temperature range of -15°C to +70°C for flexible installation and -40°C to +70°C for fixed installation, enabling broad application in various environments.

Standard lengths are 100 m, 500 m, and 1000 m. Technical changes are reserved.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/331543
qrcode für Helukabel 12871 control cable 3G 1.5 black