Technical data:

Based on DIN VDE 0262 and DIN VDE 0285-525-2-51 / DIN EN 50525-2-51
Temperature range moving -15°C to +80°C fixed -40°C to +80°C
Nominal voltage U0/U 0.6/1 kV
Test voltage 4000 V
Breakdown voltage min. 8000 V
Insulation resistance min. 20 MOhm x km
Coupling resistance max. 250 Ohm/km
Minimum bending radius moving 10x cable Ø fixed 5x cable Ø
Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad)
Construction:
Bare copper wire, according to DIN VDE 0295 cl.5, fine-wire, BS 6360 cl.5, IEC 60228 cl.5
Core insulation made of special PVC
Core marking according to DIN VDE 0293 black wires with continuous white numbering
Wires stranded in layers with optimal lay lengths
Inner jacket made of PVC
Shielding braid made of tinned copper wires, coverage approx. 85%
Outer jacket made of special PVC
Jacket color: black (RAL 9005) with meter marking
Properties:
Largely oil-resistant, oil/chemical resistance
The materials used in production are silicone and cadmium-free and free from substances that impair paint wetting
UV-resistant
Tests:
PVC self-extinguishing and flame-retardant in accordance with DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1-2 (corresponds to DIN VDE 0472 Part 804 test type B)
Notes:
Unshielded analogue type: JZ-600
Use:
PVC control cable for measuring, monitoring and control purposes on machine tools, assembly lines and conveyor belts, production lines, in plant construction, in heating and air conditioning technology, in steel and steel rolling mills. Suitable for medium mechanical stress for flexible use with free movement without tensile stress and without forced movement in dry, damp and wet rooms and outdoors (permanently installed). Must not be laid directly in the ground (from an external diameter of 20 mm suitable for direct burial) or water. The numbering is applied in such a way that the respective digits can be easily recognized even if the sheath is briefly stripped. Base lines prevent the individual digits from being confused. The green-yellow protective conductor is in the outer layer. Black special PVC outer sheath, UV-resistant. Due to the extended nominal voltage range and good UV resistance, this cable is mainly used in southern European, Arabic, Asian and eastern countries. The high shielding density ensures interference-free transmission of signals and pulses. EMC = Electromagnetic Compatibility To optimize the EMC properties, we recommend contacting the copper braid on both sides and over a large area.
Standard lengths: 100 m, 500 m, 1000 m
Subject to technical changes.