Helukabel 11249, EAN: 4060892047862

Helukabel 11249 control cable halogen-free grey

Cables > Halogen-free cables and wires > Control cables halogen-free

Helukabel 11249 control cable halogen-free grey

Lieske Part No. 329362
Mfg Part No 11249
EAN-Code 4060892047862
Manufacturer Helukabel
Here only 5,54 EUR
6,59 EUR incl. VAT

Further information for Helukabel 11249 control cable halogen-free grey

General
Degree of protectionhalogen-free
Temperature range in motion-15 °C
Temperature range, non-operating-40 °C
Rated voltage U0/U300/500 V
Test voltage2000 V
Minimum bending radius moving12,5x Conductor Ø
Minimum bending radius not moved4x Conductor Ø
Radiation resistance100x106 cJ/kg
Copper stranded wireBare
Wire insulationHalogen-free polymer
Conductor markingaccording to DIN VDE 0293
Outer sheathHalogen-free polymer
Sheath colourGrey
Flame testDIN VDE 0482-332-3-24
Corrosivity of fire gasesDIN VDE 0482-754-2
Halogen-freeDIN VDE 0482-754-1
Smoke densityDIN VDE 0482 Part 1034-1+2
Meter markingYes
Self-extinguishingYes
Flame retardantYes
Cleanroom qualifiedYes
The Helukabel control cable type 11249 is a halogen-free, flexible cable manufactured in accordance with the standards DIN VDE 0285-525-2-51 / DIN EN 50525-2-51 and DIN VDE 0285-525-3-11 / DIN EN 50525-3-11. It is used as a measurement, control, and control cable in industrial applications, particularly on machine tools, conveyor and transfer belts, production lines, in plant engineering and in climate technology. The cable is designed for fixed installation as well as for flexible applications with occasional, non-recurring movement without forced guidance and without tensile stress. It is suitable for dry, damp, and wet rooms as well as for installation on plaster. Use in steelworks and rolling mills is also intended. The cable is cleanroom qualified, highlighting its suitability for demanding environments with high cleanliness requirements.

Applications

The control cable 11249 is used in industrial electrotechnics where reliable signal transmission under moderate mechanical stress is required. It is particularly suitable for installations where the avoidance of toxic or corrosive combustion gases in the event of a fire is important, such as in production plants, manufacturing technology, and buildings with increased safety requirements. The cable is designed for indoor use, including damp and wet environments, and can be installed on plaster.

Functions and Equipment in Detail

The cable consists of bare copper conductors according to DIN VDE 0295 class 5, which are fine-stranded and thus ensure high flexibility. The conductors are insulated with a halogen-free polymer and marked according to DIN VDE 0293, with black conductors marked with a continuous white digit print. The conductors are stranded in layers with optimal lay lengths, ensuring even distribution of mechanical stress and high mechanical stability. The outer sheath is also made of halogen-free polymer and is gray in color (RAL 7001), with an integrated meter marking to facilitate length measurement during installation.

Technology Explained Simply

The rated voltage is 300/500 V, making the cable suitable for use in typical industrial control and signal circuits. The test voltage of 2000 V ensures high electrical strength. The temperature resistance is between -15 °C and +70 °C for moving applications and between -40 °C and +70 °C for fixed installation. This makes the cable suitable for use in environments with varying climatic conditions. The minimum bending radius is 12.5 times the cable diameter for moving applications and 4 times the cable diameter for fixed installation. Radiation resistance up to 100x106 cJ/kg (100 Mrad) allows use in environments with increased radiation exposure, for example in medical technology or research.

Compatibility and Accessories

The cable is available in standard lengths of 100 m, 500 m, and 1000 m. A shielded analog version is available under the designation JZ-500 HMH-C, suitable for applications with higher requirements for interference resistance. The materials used are free of silicone and cadmium, as well as free of substances that impair paint adhesion, improving the processability and long-term stability of the cable.

Installation and Mounting

Installation is typically carried out by skilled personnel who consider the requirements of the standards and the specific requirements of the respective installation. The meter marking in the outer sheath facilitates length measurement and positioning during installation. The flexible construction with fine-stranded copper conductors allows easy bending and installation, especially for moving applications. The cable is designed for moderate mechanical stress, with bending and tensile loads kept within the specified limits.

Advantages in Operation

The halogen-free design of the cable reduces the formation of toxic and corrosive gases in the event of a fire, increasing operational safety. The self-extinguishing and flame-retardant properties according to DIN VDE 0482-332-1-2 and DIN EN 60332-1-2 prevent flame spread. Smoke density is tested according to DIN VDE 0482 part 1034-1+2 and DIN EN 61034-1+2, ensuring low smoke development in the event of a fire. Cleanroom qualification makes the cable suitable for demanding environments where contamination by material abrasion or emissions must be avoided. The materials are free of substances that impair paint adhesion, improving processability in painting processes.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/329362
qrcode für Helukabel 11249 control cable halogen-free grey