Helukabel 11166, EAN: 4060892007033

Helukabel 11166 control cable 2.5 mm² grey

Cables > Control line > Flexible Control lines

Helukabel 11166 control cable 2.5 mm² grey

Lieske Part No. 300908
Mfg Part No 11166
EAN-Code 4060892007033
Manufacturer Helukabel
Here only 3,38 EUR
4,02 EUR incl. VAT

Further information for Helukabel 11166 control cable 2.5 mm² grey

General
Degree of protectionnot specified
Temperature range in motion-15 °C
Temperature range, non-operating-40 °C
Nominal voltage fixed installation, protected600/1000 V
Rated voltage moving450/750 V
Test voltage4000 V
Dielectric strength8000 V
Insulation resistance20 MOhm x km
Minimum bending radius moving7,5x Conductor Ø
Minimum bending radius not moved4x Conductor Ø
Radiation resistance80x106 cJ/kg
Copper stranded wirebare, DIN VDE 0295 Class 5
Wire insulationspecial PVC
Conductor markingJB/OB colour code
Outer sheathspecial PVC
Sheath colourGrey RAL 7001
Impairs paint adhesionfree of
Shielded analog typeY-CY-JB
Regulation lengths100 m, 500 m, 1000 m
Meter markingYes
Chemical resistanceYes
Silicone-freeYes
Cadmium-freeYes
Self-extinguishingYes
Flame retardantYes
Cleanroom qualifiedYes
The Helukabel control cable type 11166 is a flexible special PVC hose cable manufactured in accordance with the standards DIN VDE 0285-525-2-11, DIN EN 50525-2-11 and IEC 60227-5. It is designed for use in industrial applications, particularly for measurement, control and control cables on machine tools, conveyor and transfer belts, production lines, in plant engineering, in heating and climate technology, in power plants as well as in metallurgical and steel rolling mills. The cable is suitable for flexible applications with free movement without tensile stress and without forced movement guidance in dry, damp and wet rooms, but not outdoors.

Applications

The cable is used under moderate mechanical stress. It is designed for use in industrial environments where high flexibility and simultaneous resistance to environmental influences are required. The application takes place indoors, with the cable not intended for outdoor use. The operating conditions include dry, damp and wet rooms, with temperature limits for moving applications ranging from -15°C to +80°C and for non-moving applications from -40°C to +80°C.

Functions and equipment in detail

The cable consists of bare Cu strands according to DIN VDE 0295 class 5, which are fine-stranded and thus ensure high flexibility. The conductors are insulated with special PVC and marked according to the JB/OB colour code, enabling clear identification of individual conductors. The conductors are stranded in layers with optimal lay lengths to ensure even distribution of mechanical stress. The outer sheath is also made of special PVC and is grey in colour (RAL 7001), with an integrated metre marking to facilitate length measurement during installation.

Technology explained clearly

The rated voltage is 450/750 V for fixed, protected installation and 600/1000 V for fixed, protected installation. The test voltage is 4000 V, and the breakdown voltage is at least 8000 V. The insulation resistance is at least 20 MOhm x km, ensuring high electrical insulation and low leakage currents. The minimum bending radius is 7.5 times the cable diameter for moving applications and 4 times the cable diameter for non-moving applications. The radiation resistance is up to 80x106 cJ/kg (80 Mrad), enabling suitability for environments with increased radiation exposure. The materials used are free of silicone and cadmium, as well as free of substances that interfere with lacquer adhesion, which justifies the cleanroom qualification of the cable.

Compatibility and accessories

The cable is designed for use in industrial plants and can be combined with various control and measuring devices as well as other components in plant engineering. As a shielded analog type, the Y-CY-JB is mentioned, which is suitable for applications with higher requirements for electromagnetic compatibility. The cable is not intended for outdoor use, so it should not be compared or combined with outdoor cables.

Installation and mounting

Installation takes place indoors, with the cable being laid with free movement, without tensile stress and without forced movement guidance. The metre marking facilitates length measurement and positioning during installation. The minimum bending radii must be observed to ensure the mechanical integrity of the cable. The cable is laid in dry, damp and wet rooms, but not outdoors.

Advantages in operation

The cable is characterised by high mechanical and chemical resistance. The oil- and chemical-resistant materials ensure a long service life even in demanding environments. The self-extinguishing and flame-retardant properties of the PVC sheath according to DIN VDE 0482-332-1-2, DIN EN 60332-1-2 and IEC 60332-1 increase operational safety. The cleanroom qualification enables use in sensitive production environments where contamination by material abrasion must be avoided. The flexible construction with fine-stranded strands ensures high mobility and reduces the risk of breaks during frequent movement.

The cable is supplied in standard lengths of 100 m, 500 m and 1000 m. Technical modifications are reserved.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/300908
qrcode für Helukabel 11166 control cable 2.5 mm² grey