Helukabel 10696, EAN: 4060892004742

Helukabel 10696 control cable 7G 2,5 mm² black

Cables > Control line > Flexible Control lines

Helukabel 10696 control cable 7G 2,5 mm² black

Lieske Part No. 298546
Mfg Part No 10696
EAN-Code 4060892004742
Manufacturer Helukabel
Here only 4,88 EUR
5,81 EUR incl. VAT

Further information for Helukabel 10696 control cable 7G 2,5 mm² black

General
Temperature range in motion-15 °C to +80 °C
Temperature range, non-operating-40 °C to +80 °C
Nominal voltage300/500 V
Test voltage4000 V
Dielectric strengthmin. 8000 V
Insulation resistancemin. 20 MΩ·km
Minimum bending radius moving7,5x Conductor Ø
Minimum bending radius not moved4x Conductor Ø
Conductor markingorange conductors with continuous black digit printing
Sheath colourOrange RAL 2003
Material of stranded wireBare Cu stranded wire in accordance with DIN VDE 0295 Class 5
Insulation materialspecial PVC
Outer sheath materialspecial PVC
Substances interfering with paint adhesionfree of
Regulation lengths100 m, 500 m, 1000 m
Oil- and chemical-resistantYes
Silicone- and cadmium-freeYes
Meter markingYes
The Helukabel control cable type 10696 is a flexible special PVC cable specifically designed for use in interlock technology. It complies with the requirements of standards DIN VDE 0285-525-2-51 and DIN EN 50525-2-51 and is designed for medium mechanical stress. The cable is suitable for flexible applications with free movement without tensile stress and without forced movement guidance, particularly in dry, damp and wet indoor environments. Outdoor use is not intended. According to DIN EN 60204-1 and VDE 0113-1, it is recommended to mark insulated conductors of interlock circuits that remain energized when the main switch is turned off in orange – a marking that is implemented in this cable by the orange outer sheath colour (RAL 2003) and continuous black digit marking on the conductors.

Applications
Control cable 10696 is used in industrial plants, machine construction and drive technology where safe and reliable control circuits are required. It is particularly suitable for applications where interlock systems are operated with external power supply, which may remain energized even when switched off. The cable is designed for use in environments with medium mechanical load, for example in machine tools, conveyor systems or production lines, where it can be flexibly installed and moved without tensile forces acting on the cable.

Functions and equipment in detail
The cable consists of bare copper strands according to DIN VDE 0295 class 5, which are fine-stranded and thus ensure high flexibility. The conductors are insulated with special PVC and stranded in layers, ensuring optimal lay lengths to minimize mechanical stress. Conductor identification follows DIN VDE 0293 with orange-coloured conductors marked with a continuous black digit print. The outer sheath is also made of special PVC and is orange (RAL 2003), with an integrated meter marking to check the length during installation.

Technology explained simply
The rated voltage is 300/500 V, meaning the cable is designed for operating voltages up to 500 V between conductor and earth and 300 V between conductors. The test voltage of 4000 V and the minimum breakdown voltage of 8000 V ensure high electrical strength. The insulation resistance is at least 20 MΩ·km, guaranteeing high insulation quality and low leakage currents. Radiation resistance up to 80 Mrad (80x10⁶ cJ/kg) makes the cable suitable for applications in environments with ionizing radiation, for example in medical technology or special industrial processes. The PVC insulation is self-extinguishing and flame-retardant according to DIN VDE 0482-332-1-2, DIN EN 60332-1-2 and IEC 60332-1-2, reducing fire hazard in case of failure.

Compatibility and accessories
The control cable is designed for flexible applications and can be used in combination with other components of interlock technology, such as switches, relays or fuses. The orange colouring and conductor marking facilitate identification and wiring within control systems. The cable is not intended for outdoor use, as it does not meet special weather or UV protection requirements.

Installation and mounting
The cable can be installed with free movement without tensile stress. The minimum bending radius is 7.5 times the cable diameter for moving applications and 4 times for non-moving applications. Temperature ranges are between -15 °C and +80 °C for moving applications and between -40 °C and +80 °C for non-moving applications. The materials are silicone- and cadmium-free and free of substances that interfere with lacquer adhesion, facilitating processing and installation in sensitive environments.

Advantages in operation
Control cable 10696 offers high mechanical and electrical reliability. The oil- and chemical-resistant materials ensure long service life even in industrial environments with aggressive media. The flame-retardant and self-extinguishing PVC insulation increases operational safety. Clear conductor marking and meter marking support precise and error-free installation. The cable is available in standard lengths of 100 m, 500 m and 1000 m, facilitating planning and procurement for larger projects.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/298546
qrcode für Helukabel 10696 control cable 7G 2,5 mm² black