General
Bandwidth	4,7 mm
Material	PA66
Colour	Natural colour
Holding force	High
Engagement force	low
End of band	angled
Processing	By hand or with tool
Compatibility	MK9P, EVO9iSP, EVO7i, EVO7iSP
Internal gearing

The cable tie T80L-PA66-NA-C1 from HellermannTyton is a fastening element from the T-Series, specifically developed for the secure and durable bundling of cables, wires or hoses. It features a length of 390 mm and a strap width of 4.7 mm, with the material PA66 (polyamide 66) being used, known for its high strength and resistance to mechanical stress as well as environmental influences. The natural colouring ensures good visibility in use and is suitable for applications in indoor and outdoor environments. The construction of the cable tie features an internal toothed mechanism, which ensures a secure hold on the bundle and prevents shifting or loosening of the fastening. The angled strap end facilitates threading, making handling efficient even in tight spaces. The cable ties can be installed both manually and with special processing tools, enabling process-safe and reproducible assembly in production or installation.

Applications
The cable tie T80L-PA66-NA-C1 is suitable for a wide range of applications in the field of electrical and IT installation, particularly where high holding force is required alongside low threading force. It is frequently used in industrial electrical engineering, machine building, automation technology, as well as in building and cabling technology. The universal usability is supported by the material variety of the T-Series, enabling adaptation to different environmental conditions and loads. The fastening of cables, wires or hoses in vertical or horizontal runs, in enclosures, on machines or in cabling ducts is typical for this cable tie.

Functions and Equipment in Detail
A central feature of the cable tie is the internal toothed mechanism, which ensures a secure anchoring of the strap within the locking mechanism. This guarantees a secure hold on the bundle even under dynamic loads. The angled strap end reduces the force required for threading and improves handling, especially when processing large quantities. The use of PA66 as the material provides high mechanical strength, resistance to moisture and temperature fluctuations, as well as good ageing resistance. The cable ties are designed for easy installation and can be processed both manually and with tools such as MK9P, EVO9iSP or EVO7i, increasing efficiency in production.

Technology Explained Simply
The high holding force of the cable tie is achieved through the material strength of PA66 and the special design of the locking mechanism. The low threading force means the cable tie is easy to close without applying excessive force to the bundle or surrounding area. This is particularly important to avoid damaging cables or wires. The internal toothed mechanism ensures that the strap does not slip back after threading, guaranteeing a permanent fastening. The material PA66 is a technical plastic widely used in the electrical and automotive industries due to its high strength, heat resistance and chemical resistance.

Compatibility and Accessories
The cable tie T80L-PA66-NA-C1 is compatible with various processing tools, including MK9P UNTEN (MARK 9P), EVO9iSP, EVO7i and EVO7iSP. These tools enable fast and precise installation, especially in serial production environments. Additionally, other cable ties from the T-Series are available, such as the TY28M 360x4.8 mm or the natural cable tie 4.8 x 370 mm, which can be selected according to requirements for length, width or material. The use of tools increases process safety and reduces error rates during installation.

Installation and Mounting
Installation is carried out by simply threading the strap around the bundle to be fastened and then pulling the strap end through the locking mechanism. The angled strap end facilitates insertion, especially in tight spaces. During manual installation, the strap is pulled until it stops, whereupon the internal toothed mechanism secures the lock. When using tools, the locking mechanism is automatically activated, achieving uniform and reproducible tension. The cable ties can be mounted at various angles and positions, enabling flexible application in different installation scenarios.

Operational Advantages
The cable tie T80L-PA66-NA-C1 offers high mechanical load capacity and long service life, even under harsh operating conditions. The low threading force reduces installation time and minimizes the risk of damaging the wires or cables being fastened. The use of PA66 ensures high resistance to moisture, temperature fluctuations and mechanical stress. Its universal applicability across various industries and application areas makes it a versatile fastening element. Compatibility with various tools increases installation efficiency and supports process safety in production.

Cable tie, T-Series, PA66, internal toothed mechanism, threading force, processing tool