| General |
| Product type | Door hold magnet |
| Function | Feedback of closure status |
| Technology | Magnetic flux monitoring |
| Protection functions | Reverse polarity protection, flyback diode |
| Compatibility | anchor plate ASV 65 |
The Hekatron THM 446 is a door holding magnet for hold-open systems, specifically designed for use in security technology. It serves for the mechanical holding of doors and simultaneously enables an electrical feedback of the locking status to a higher-level control or alarm system. This feedback is achieved via magnetic flux monitoring, which allows precise detection of the door’s state – open or closed. Particularly important is the ability to distinguish between an open state held by the magnet itself and an open state maintained by wedging or mechanical blocking. This increases the reliability of security systems, as unauthorized fixings can be detected.
Applications
The THM 446 is used in systems where continuous monitoring of the door status is required, for example in alarm systems, access control systems, or in buildings with increased security requirements. It is suitable for applications where the door must remain open during normal operation, but must close immediately in case of alarm or malfunction. The feedback of the locking status enables central monitoring and documentation, which is important for compliance with safety regulations and for traceability of events.
Functions and Equipment in Detail
The door holding magnet operates with magnetic flux monitoring, which continuously monitors the magnetic flux in the system. When the magnet is no longer in contact with the anchor plate ASV 65, the flux changes, which is interpreted as a signal for an open state. The system thus recognizes whether the door is held open by the magnet or by another means (such as wedging). This is particularly relevant to detect manipulations or bypass attempts. The THM 446 is equipped with reverse polarity protection, which prevents damage caused by incorrect polarity of the supply voltage. Additionally, it integrates a flyback diode that limits the inductive voltage spikes generated when the magnet is switched off, thereby protecting electronic components in the system.
Technology Explained Simply
Magnetic flux monitoring is based on measuring the magnetic field strength inside the magnet. When the magnet is in contact with the anchor plate, the magnetic circuit is closed and the flux is stable. At a distance, i.e., when the door is open, the flux collapses, which is electrically detected and transmitted as a signal. This technology enables reliable state monitoring without additional mechanical contacts. The integrated flyback diode protects the system from voltage spikes generated by inductance when the magnet is switched off. The reverse polarity protection prevents electronic components from being damaged by incorrect current direction.
Compatibility and Accessories
The THM 446 is specifically designed for use with the anchor plate ASV 65. The combination of door holding magnet and anchor plate forms a complete hold-open module, which can be integrated into existing security systems.
Mounting and Installation
Mounting is carried out on the door and door frame, with the THM 446 mounted on the door and the anchor plate ASV 65 mounted on the frame. The electrical connection is made via the terminal clamps of the magnet, which are connected to the higher-level control or alarm system.
Operation
In operation, the THM 446 ensures that the door is mechanically held in the open position, while simultaneously being electronically monitored. The feedback occurs in real time, enabling a central control or alarm system to immediately react to any changes. The ability to distinguish between magnetically and mechanically held states increases security, as manipulations can be detected. The integrated protection functions (reverse polarity protection, flyback diode) ensure reliable and damage-free operation, even in case of incorrect operation or disturbances in the power supply network.