Further information for Hager ZY5N2SA Mounting Plate Power Supply
General
Nominal current
1,60 A
Rated switching capacity Icn
25 kA
Number of poles
2
Insulation voltage Ui
6000 V
REACH-SVHC free
RoHS compliant
The ZY5N2SA fitting kit from Hager is a pre-assembled solution for power supply in the area for additional devices (RfZ) within enclosures with a height of 1400 mm. It serves for efficient and safe power supply of additional devices, such as control or monitoring units, within a distribution enclosure. The kit is specifically designed for installation in the NAR (network connection area) and includes a busbar box of type SABO with a rated current of 1.6 A, as well as two cables intended for supplying the RfZ area.
Applications
This fitting kit is intended for use in industrial and commercial electrical installations, particularly in enclosures with a height of 1400 mm. It is used in electrical installations within distribution and meter enclosures where reliable power supply for additional devices in the RfZ area is required. Typical applications include building and plant automation, where integration of control and monitoring units into the enclosure is necessary.
Functions and Equipment in Detail
The kit includes a SABO busbar box with a rated current of 1.6 A, serving as a protective device and safeguarding the power supply in the RfZ area. The box is designed for use in enclosures and enables structured and safe power distribution. Two cables are included in the delivery scope, intended for connecting the busbar box to the additional devices to be powered in the RfZ area. The cables are suitable for use in the NAR (network connection area) and ensure a safe electrical connection.
Technology Explained Simply
The SABO busbar box with a rated current of 1.6 A functions as a circuit breaker, preventing damage to connected devices in case of overload or short circuit. The rated switching capacity of 25 kA according to IEC 60898-1 demonstrates the box’s ability to switch safely during a short circuit, preventing damage to the device or installation. The insulation voltage Ui of 6000 V ensures electrical insulation and allows use in installations with high voltages. The number of poles is 2, indicating a two-pole circuit, typical for powering devices within an enclosure.
Compatibility and Accessories
The fitting kit is specifically designed for enclosures with a height of 1400 mm and is installed in the NAR (network connection area). It is intended for use with additional devices in the RfZ area, with the cables directly connected to the busbar box.
Mounting and Installation
Mounting takes place in an enclosure with a height of 1400 mm, with the busbar box installed in the NAR. The two cables are connected according to the requirements of the additional devices to be powered in the RfZ area. Installation must comply with applicable electrical regulations, and safety regulations for handling electrical installations must be observed.
Operational Advantages
The fitting kit provides a pre-assembled and standardized solution, reducing mounting time in the enclosure. The integrated busbar box with a rated current of 1.6 A and a switching capacity of 25 kA ensures safe power supply for additional devices. The use of two cables allows flexible connection of devices in the RfZ area. Compliance with REACh-SVHC and RoHS ensures environmental compatibility and the use of materials free from harmful substances.