Hager ZY20MS, EAN: 3250617851817

Hager ZY20MS Meter Cabinet Fitting Kit eHZ Si.box 1A

Installation > Distributor Cabinets > Meter Cabinets

Hager ZY20MS Meter Cabinet Fitting Kit eHZ Si.box 1A

Lieske Part No. 345732
Mfg Part No ZY20MS
EAN-Code 3250617851817
Manufacturer Hager
Here only 108,87 EUR
129,56 EUR incl. VAT

Further information for Hager ZY20MS Meter Cabinet Fitting Kit eHZ Si.box 1A

General
Nominal cross section conductor (AWG)1.973554 kcmil
Nominal voltage U0230 V
Nominal voltage U230 V
The ZY20MS fitting kit from Hager is a pre-configured module for voltage supply in frame fields (RfZ) via BKE, specifically designed for integration into meter enclosures. It is equipped with a SIBO 1A un-metered, enabling reliable and flexible power distribution in industrial and commercial applications. The system is part of a modular solution that can be integrated into existing installations and meets the requirements for safe and standard-compliant power supply.

Fitting kit for voltage supply in frame field via BKE
The ZY20MS serves as a pre-assembled fitting kit, directly installed into a frame field. It is specifically designed for use with BKE (building unit for electrical installations) and enables quick and error-free installation. The inclusion of a SIBO 1A un-metered ensures safe power distribution, with the term un-metered indicating that no electricity consumption measurement is performed – typical for distribution components not intended for energy billing.

Functions and equipment in detail
The system is designed for a nominal voltage of 230 V, with an insulation voltage Ui specified at 6000 V. This high insulation voltage ensures sufficient electrical safety and allows use in environments with increased insulation requirements. The number of poles is 2, with pole type 1P+N (one phase plus neutral conductor). This configuration is standard for single-phase network connections in Germany and Europe and ensures correct power distribution.

Technology explained clearly
The use of a SIBO 1A as a fuse element provides protection against overloads and short circuits. The designation 1A" refers to the nominal current of the fuse, suitable for protecting lines with low current demand. The "un-metered execution means the device does not serve for measuring electricity consumption, but is used solely for power distribution within the distribution board. The insulation voltage of 6000 V is a measure of the system's electrical strength, ensuring no breakdowns occur even under transient voltage surges.

Compatibility and accessories
The ZY20MS fitting kit is designed for use in meter enclosures executed according to DIN VDE 0603/1 and DIN 43 870. It is compatible with frame fields (RfZ) and can be used in surface, flush, or semi-recessed mounting. Integration is achieved via BKE, enabling modular and flexible expansion of the distribution system. Use in combination with other modules such as distribution switches, surge protection devices, or communication modules is possible, provided they comply with the requirements of VDE-AR-N 4100:2019-04.

Installation and mounting
Mounting takes place in the frame field (RfZ) via BKE, with the pre-assembled fitting enabling quick and error-free installation. Connection options are designed so that the main cable can be introduced from below or sideways into the lower connection area and connected according to VDE-AR-N 4100:2019-04. Connections are made via pre-assembled busbar terminals, which can be opened without tools, simplifying installation. Positioning within the enclosure follows the technical connection conditions (TAB) of VNB and the requirements of the respective network operators.

Advantages in operation
The ZY20MS provides reliable and low-maintenance power distribution. The pre-configured fitting reduces installation time and minimizes error sources. The high insulation voltage of 6000 V ensures a high safety standard, and compatibility with modular systems allows flexible expansion. Use in industrial environments is guaranteed due to robust construction and compliance with applicable standards (VDE-AR-N 4100:2019-04). The SIBO 1A un-metered design makes the module particularly suitable for distribution tasks where no electricity measurement is required.

Compliance with standards and environmental requirements
The product is RoHS-compliant and free of REACh-SVHC, enabling use in the EU and other regions with strict environmental regulations. Compliance with VDE-AR-N 4100:2019-04 ensures the system meets requirements for electrical safety and grid integration. The design also considers requirements for protection class 44, ensuring high mechanical and electrical safety.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/345732
qrcode für Hager ZY20MS Meter Cabinet Fitting Kit eHZ Si.box 1A