| General |
| Model | For 2-story support plates |
| Nominal cross section | 10 mm² |
| Number of poles | 3 |
| Panel entry | Standard |
| For installation kit | 1- and 2-rows |
| Type of cable lug | Pin |
The universal Z fitting kit, type ZY02PV, from Hager is a pre-assembled set for installation in photovoltaic systems, particularly for PV overcurrent protection and cascade applications. It includes a ZTP 750 mm cable tree designed for incoming and outgoing connections. The construction is designed for use in meter enclosures, with the fitting intended for 2-tier mounting plates. The maximum cross-sectional capacity is 10 mm², and the maximum continuous current is 32 A, enabling application in photovoltaic systems with a power output of up to approximately 22 kW. The design features pin-type cable lugs, ensuring a secure and reliable connection.
universal Z fitting kit is specifically developed for integration into distribution systems in accordance with VDE-AR-N 4100:2019-04. It serves for safe energy distribution and is suitable for mounting kits in single- and double-row configurations. The pole count is 3, enabling use in three-phase systems. The meter access type is standard, allowing seamless installation into existing enclosure configurations.
Functions and equipment in detail
The set is designed for use in photovoltaic systems where safe and structured energy distribution is required. The ZTP 750 mm cable tree provides a stable connection for incoming and outgoing lines. The pin-type cable lugs enable easy installation and a secure electrical connection. The maximum current rating of 32 A with a nominal cross-section of 10 mm² meets the requirements for continuous loads in PV systems. The construction is designed to comply with the requirements of VDE-AR-N 4100:2019-04, particularly for systems with a maximum continuous current draw of 32 A.
Technology explained simply
The technology of the fitting kit is based on a pre-fabricated cable tree that enables connections between various components in the meter enclosure. The use of pin-type cable lugs ensures a mechanically stable and electrically reliable connection. The 3-pole configuration allows integration into three-phase networks, which is common for most photovoltaic systems. The limitation to 32 A continuous current and 10 mm² cross-section is a technical specification ensuring the connection remains stable under the intended load conditions.
Compatibility and accessories
The fitting kit is designed for mounting kits in single- and double-row configurations and is suitable for meter enclosures designed for PV overcurrent protection and cascade applications. It is designed for 2-tier mounting plates, enabling integration into standard meter enclosure configurations. It is used in conjunction with meter enclosures complying with DIN VDE 0603/1 and DIN 43 870. Compatibility with other components such as busbars or cable connections is ensured by the standard meter access design.
Installation and mounting
Mounting is carried out in meter enclosures designed to accommodate 2-tier mounting plates. Installation takes place in the designated mounting compartments, with incoming and outgoing connections realized via the ZTP 750 mm cable tree. The pin-type cable lugs allow for easy and secure connections. Compliance with VDE-AR-N 4100:2019-04 must be ensured during installation, particularly regarding the routing of the main cable, which must be introduced from below or from the side into the lower connection compartment.
Operational advantages
The universal Z fitting kit provides a pre-assembled solution that reduces mounting time and minimizes error potential. The use of standardized components and compliance with VDE standards ensure safe and reliable operation. The 3-pole configuration and capacity for 10 mm² cable cross-section allow flexible use in various PV system configurations. The maximum continuous current rating of 32 A is sufficient for typical PV systems in residential and commercial applications.
RoHS compliant
The product complies with the requirements of the RoHS directive, ensuring the use of environmentally friendly materials and environmental compatibility. Compliance is confirmed in the manufacturer’s datasheet.
Application area
The fitting kit is primarily intended for photovoltaic systems, particularly for systems requiring PV overcurrent protection or cascade arrangements. It is suitable for continuous loads up to 32 A and cable cross-sections up to 10 mm². The application is in meter enclosures complying with DIN VDE 0603/1 and DIN 43 870. Installation is carried out in conjunction with meter enclosures designed to accommodate 2-tier mounting plates.