Further information for Hager ZK54C7N Meter Cabinet 4ZP 2-field
General
Model
2-story
Number of meter cabinets
4
Lower connection space
With bus bar 5-pole
Main switch rated current
63 A
Number of distributor rows
0
Width
500 mm
Height
1350 mm
Width in number of modular spacings
24
Connection space
300 mm
Colour
White
RAL-number
9010
Degree of protection (IP)
Other
With wiring
With mounting plate
The Hager complete unit universZ, type ZK54C7N, is a meter cabinet in a 2-storey design with a total height of 1350 mm and a width of 500 mm. It is specifically designed for use in Hesse and offers 4 meter positions in a 2-section configuration. The construction is designed for installation in energy distribution systems, with its robust design ensuring high safety standards and long service life. The unit is finished in white (RAL 9010) and consists of a housing made of powder-coated, baked, profiled 1 mm thick steel sheet. The interior lining is fully made of plastic, enabling a clean and corrosion-resistant interior design.
Applications
This complete unit is intended for installation in residential and commercial buildings, particularly in regions that comply with the technical requirements of the VNB (Verband der Netzbetreiber) for Hesse. It is suitable for electronic household meters (eHZ) as well as meters with 3-point mounting (3HZ). The construction meets the requirements of DIN VDE 0603/1 and the sizing guideline DIN 43 870. The installation solution is suitable for surface mounting, installation in wall niches, or partially recessed mounting.
Functions and Equipment in Detail
The unit features a lower connection compartment with a 5-pole busbar, enabling secure and structured wiring. The busbar has a width of 5 mm and a height of 12 mm. The connection cross-sections for meter input and output lines are each 10 mm². The wiring is pre-integrated, simplifying installation. The door is flush with the front, equipped with internal, adjustable hinges allowing an opening angle of 110°. The door can be mounted on the left or right and is fitted with a latch lock, which can be replaced with other locking systems.
Technology Explained Simply
The protection rating IP00 means that the unit provides no protection against contact or ingress of foreign objects and water. It is therefore intended exclusively for indoor use, where no direct environmental influences such as moisture or dust occur. The rated current of the main switch is 63 A, sufficient for typical household applications with normal energy consumption class. The network configuration is TN-S, indicating a separate neutral and protective conductor system. The construction is designed for mounting meter panels (mounting kit), with the number of distribution rows and empty positions being zero.
Compatibility and Accessories
Various accessories are compatible with this meter cabinet, extending its functionality. These include the cover plate ZU98, which ensures a secure and sealable closure lock. Insulating caps (R10H) and meter screws (N94N) provide safe and insulated connections for the conductors. Fitting kits such as ZY3TR and ZY3XL enable integration of power supply units and communication modules, particularly for smart metering applications. These accessories are specifically designed for the universZ series, ensuring uniform and standardized installation.
Installation and Mounting
Mounting is achieved via integrated plastic flanges at the top and bottom, enabling easy cable routing. The rear of the housing features a cutout for wiring. The busbar sockets on both sides of the lower connection compartment can be opened without tools, allowing connection between multiple cabinets or to a cable distribution box. The cabinets can be flanged side by side or stacked, with the total width in modular units being 24. Installation must comply with VDE-AR-N 4100:2019-04, with the main cable introduced from below or sideways into the lower connection compartment and connected accordingly.
Operational Advantages
The universZ complete unit offers a modular and flexible solution for meter installation. The integrated wiring and pre-fabricated busbar reduce installation time and increase installation accuracy. The use of plastic for the interior lining prevents corrosion and ensures a clean, low-maintenance environment. Compatibility with various accessories allows adaptation to specific requirements, such as integration of tariff and remote control receivers. The construction is RoHS-compliant, ensuring environmental compatibility and the use of non-hazardous materials.