Hager ZK3EL22, EAN: 3250617724005

Hager ZK3EL22 Meter Cabinet 2-field 1050mm

Installation > Distributor Cabinets > Meter Cabinets

Hager ZK3EL22 Meter Cabinet 2-field 1050mm

Lieske Part No. 393976
Mfg Part No ZK3EL22
EAN-Code 3250617724005
Manufacturer Hager
Here only 982,01 EUR
1.168,59 EUR incl. VAT

Further information for Hager ZK3EL22 Meter Cabinet 2-field 1050mm

General
ModeleHZ
Number of meter cabinets2
Lower connection spaceWith bus bar 5-pole
Main switch rated current63 A
Number of distributor rows0
Width500 mm
Height1050 mm
Width in number of modular spacings24
ColourWhite
RAL-number9010
Degree of protection (IP)Other
With wiringyes
With mounting plateno
The Hager complete unit ZK3EL22 from the universZ series is a meter cabinet with a total height of 1050 mm and a width of 500 mm, designed for the installation of two electronic household meters (eHZ). The configuration as a 2-field system enables flexible use and expansion options, particularly for supply networks in the federal states of North Rhine-Westphalia, Schleswig-Holstein, Hamburg, Mecklenburg-Western Pomerania, as well as Avacon. The housing is made of galvanized, profiled sheet steel with a powder coating in RAL 9010 (white) and features an internal plastic lining. The door is flush-mounted, equipped with adjustable hinges, and can open on the left or right side, with a latch lock securing access. The protection rating is IP00, meaning the device is not protected against touch, ingress of foreign objects, or water, and therefore must only be installed in enclosed, dry rooms.

Applications
This complete unit is intended for installation in residential and commercial buildings, particularly in networks with a rated current of up to 63 A. It is suitable for energy distribution and measurement in households with standard electricity consumption classes, as well as for continuous applications such as photovoltaic feed-in up to 22 kW (32 A) or up to 30 kW (44 A) when using 16 mm² cables. The construction complies with the technical connection conditions (TAB) of VNB and VDE-AR-N 4100:2019-04. The meter positions are designed for electronic household meters (eHZ), with mounting via a 3-point attachment. The cross-sections for incoming and outgoing meter cables are each 10 mm².

Functions and Equipment in Detail
The unit features a lower connection compartment equipped with a 5-pole busbar. The busbar has a rated current of 250 A and is suitable for connecting multiple cabinets or to a cable distributor. The busbar feed terminal is not included. The wiring is pre-installed, enabling quick commissioning. The cabinet width corresponds to 24 partitioning units (PLE), ensuring standardization within the universZ series. The door can be replaced with a different lock, allowing adaptation to specific security requirements.

Technology Explained Simply
The 5-pole busbar in the lower connection compartment serves for current distribution and enables parallel supply to multiple consumers. The construction with 2 meter positions allows installation of two separate meters, for example for main consumption and PV feed-in. The pre-wiring reduces installation time. The IP00 protection rating means the device is not suitable for outdoor use or in damp environments, and must be installed exclusively in enclosed, dry rooms. The rated current of the main switch is 63 A, which is sufficient for typical residential consumers.

Compatibility and Accessories
Various fitting packages are compatible with this complete unit, including ZY3XL for universZ TRE, ZY02PV for PV systems, ZY3TR for voltage supply with DII, and ZY14AEHZ for applications according to §14a EnWG with eHZ and RfZ. Additional compatible items include the meter mounting plate ZU96EZ (450 mm), the S-busbar connector ZM15H (5-pole, 250 A), and the cover strip ZZ35S (216 mm for 12 PLE). These accessories allow application-specific adaptation of the cabinet to different network configurations.

Installation and Mounting
Mounting is possible in wall-mounted or built-in variants, with the door flush-mounted. Cable connections are made via integrated plastic flanges at the top and bottom. The main circuit must be introduced from below or from the side into the lower connection compartment and connected in accordance with VDE-AR-N 4100:2019-04. Cabinets can be flanged side-by-side or stacked, enabling modular expansion. The rear side of the plastic component is pre-drilled to facilitate installation.

Operational Advantages
The complete unit offers a standardized, modular solution for energy distribution in residential and commercial buildings. The pre-wired connections and integrated busbar reduce installation time. The construction is designed to meet the requirements of VDE-AR-N 4100:2019-04 and the TAB of VNB, ensuring compliant installation. The use of 24 PLE enables flexible integration into existing distribution systems. The robust construction from galvanized sheet steel and powder coating ensures long service life and reliability in operation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/393976
qrcode für Hager ZK3EL22 Meter Cabinet 2-field 1050mm