Further information for Hager ZH54C4N Meter Cabinet 2ZP 1-field
General
Model
2-story
Number of meter cabinets
2
Lower connection space
With bus bar 5-pole
Main switch rated current
63 A
Number of distributor rows
0
Width
250 mm
Height
1350 mm
Width in number of modular spacings
12
Connection space
300 mm
Colour
White
RAL-number
9010
Degree of protection (IP)
Other
With wiring
With mounting plate
The Hager complete unit universZ, type ZH54C4N, is a 1-field meter cabinet system with a total height of 1350 mm and two meter positions. It is specifically designed for requirements in Hesse and complies with the technical connection conditions (TAB) of VNB as well as the regulations of VDE-AR-N 4100:2019-04. The device is intended for the installation of energy meters and enables structured and standard-compliant energy management in residential and commercial buildings. The construction from profiled, powder-coated steel sheet (1 mm thickness) ensures a stable and durable structure suitable for mounting in wall niches, on walls, or partially recessed.
Applications
This complete unit is intended for use in residential and commercial buildings, particularly in installations with a maximum rated current of 63 A for household consumer installations. It supports the installation of electronic household meters (eHZ) as well as meters with 3-point mounting (3HZ). The design is intended for supply networks of type TN-S. Applications include single- and multi-family houses, as well as smaller commercial and service facilities where a clear separation between meter and distribution areas is required.
Functions and Equipment in Detail
The meter cabinet system features a lower connection compartment with a 5-pole busbar, enabling secure and reliable power distribution. The busbar is rated for a nominal current of 250 A, while the main switch has a nominal current of 63 A. The cross-sections for incoming and outgoing meter cables are each 10 mm². The wiring is pre-integrated, allowing installation to continue immediately after mounting. The door is flush with the front, features adjustable internal hinges, and can open on the left or right side with an opening angle of 110°. The door locking is achieved via a latch lock, which can optionally be replaced with other locking systems.
Technology Explained Simply
The construction of the meter cabinet meets requirements for electrical safety and power supply reliability. The protection rating IP00 means the device is not protected against touch, ingress of foreign objects, or water — thus, it is intended exclusively for indoor use. The interior lining is entirely made of plastic, ensuring high insulation capability and corrosion resistance. Cable entries are provided via integrated plastic gland plates at the top and bottom, with the lower section allowing tool-free opening of the busbar gland plates to enable connections between multiple cabinets or with a cable distribution box. The width is 250 mm, equivalent to 12 partitioning units (PLE), and the depth of the connection compartment is 300 mm.
Compatibility and Accessories
The ZH54C4N is designed for combination with various accessories that extend its functionality. These include the universZ TRE fitting kit (ZY3XL), suitable for mounting tariff and impulse switches, as well as the universal 3-point closed locking plate with sealing (ZU98), enabling secure and sealed coverage of meter positions. Additionally, meter screws (N94N) and insulating caps (R10H) are available to facilitate installation and maintenance. The universZ fitting kit for SG position (ZY3TR) supports integration of voltage supply units with DII. Mounting is done without an additional mounting plate, as the enclosure is directly fixed to the wall.
Mounting and Installation
The meter cabinet is mounted in wall niches, on walls, or partially recessed. The door can be installed on the left or right side as required. Cable entries are via the integrated gland plates at the top and bottom. The main cable must be introduced from below or sideways into the lower connection compartment and connected according to VDE-AR-N 4100:2019-04. The wiring is pre-integrated in the device, so no additional connections are required. Cabinets can be flanged side-by-side or stacked vertically to realize larger installations.
Operational Advantages
The universZ complete unit offers clear structuring of energy distribution and simplifies maintenance and inspection. The integrated wiring reduces installation time and minimizes error sources. The robust construction from steel sheet and plastic lining ensures long service life and high reliability. Compliance with VDE-AR-N 4100:2019-04 regulations and technical connection conditions (TAB) of VNB guarantees standard conformity and acceptance by network operators. The ability to supplement the device with various accessories increases flexibility in adapting to specific requirements.
Color and Surface
The device is powder-coated in white (RAL 9010), offering high resistance to corrosion and mechanical stress. The surface is smooth and easy to clean, simplifying maintenance. The neutral color scheme fits into most building concepts.
Protection Rating and Safety
The protection rating IP00 means the device is not protected against touch, dust, or water. Therefore, it is intended exclusively for use in enclosed indoor spaces. Safety is ensured by compliance with VDE-AR-N 4100:2019-04 and the use of protective elements such as the main switch with a 63 A rated current. The construction meets the requirements of protection class II, meaning no protective earth connection is required.