Further information for Hager ZH52P9K meter cabinet 1-field
General
Model
1-story
Number of meter cabinets
1
Lower connection space
With bus bar 5-pole
Main switch rated current
63 A
Number of distributor rows
3
Width
250 mm
Height
1350 mm
Width in number of modular spacings
12
Cover model
Narrow
Colour
White
RAL-number
9010
Degree of protection (IP)
Other
With wiring
With mounting plate
The Hager ZH52P9K is a complete unit of the universZ series, designed for use as a meter cabinet in residential and small consumer installations. The unit has a total height of 1350 mm and is designed in the Middle Germany configuration, enabling adaptation to regional distribution requirements. It features a single meter position (1ZP) and is designed for installation of distributors with 4 rows (VT-4rh). The width is 250 mm, equivalent to 12 partition units (PLE), and the enclosure is finished in white (RAL 9010). The construction is suitable for surface mounting, flush mounting, or semi-recessed mounting.
Complete unit
This unit is designed as a complete unit, meaning it includes all necessary components for installing a meter and distributor section. It is intended for use in residential buildings with standard household installations up to 63 A (10 mm²) according to DIN 18015-1. The design meets the technical connection conditions (TAB) of the VNB and is suitable for installation of electronic household meters (eHZ) or meters with 3-point mounting (3HZ). The construction also considers applications with continuous current draw up to 32 A (10 mm²) or 44 A (16 mm²) according to VDE-AR-N 4100:2019-04, for example for photovoltaic systems up to 30 kW.
Functions and equipment in detail
The ZH52P9K features a lower connection compartment with a 5-pole busbar, intended for connecting cables and distributors. The busbar enables structured and secure cable connections in the lower part of the cabinet. The wiring is already integrated, simplifying installation. The door is flush with the front, features internal, adjustable hinges, and can be opened on the right or left side, with an opening angle of 110°. The door lock is equipped with a latch locking mechanism, which can optionally be replaced by other locking systems.
Technology explained clearly
The enclosure is made of stable, profiled sheet metal, 1 mm thick, powder-coated, baked steel sheet, providing high mechanical stability and corrosion resistance. The interior lining is fully made of plastic, increasing insulation and electrical safety. Cable entries are provided at the top and bottom via integrated plastic gland plates. In the rear part of the plastic component, there is a pre-drilled surface that facilitates mounting. The busbar sleeves are arranged as flanges on both sides and can be opened without tools in the lower section, allowing busbars to be connected between different cabinets or in conjunction with a cable junction box and a connection set.
Compatibility and accessories
The ZH52P9K is designed for flanged mounting next to or stacked on top of each other, enabling flexible arrangement in larger distribution systems. It is designed for use with a main switch with a rated current of 63 A. The distributor rows are arranged in 3 rows, enabling clear structuring of cables and switches. The degree of protection is classified as other, with the technical description indicating protection class 44 (according to DIN VDE 0100-443), which includes protection against contact and mechanical impact in indoor environments. The protection class is II, meaning the device can be operated without earthing.
Mounting and installation
Mounting is typically done on a wall, with installation options including surface mounting, flush mounting, or semi-recessed mounting. The main cable must be introduced into the lower connection compartment from below or from the side and connected according to VDE-AR-N 4100:2019-04. The busbar sleeves allow tool-free connection, reducing installation time. The pre-drilled surface in the rear part of the plastic component facilitates securing and positioning of the cabinet.
Advantages in operation
The ZH52P9K offers a structured and secure installation for meters and distributors in residential buildings. The integrated wiring and pre-fabricated connection points reduce installation time and increase reliability. The flanged mounting allows flexible expansion of the system. The use of plastic for the interior lining ensures high electrical insulation and reduces the risk of short circuits. The door lock with latch mechanism provides secure locking, which can optionally be replaced by other locking systems.