Further information for Hager ZH3EZ12PN Meter Cabinet 2ZP 1-field
General
Model
eHZ
Number of meter cabinets
2
Lower connection space
With bus bar 5-pole
Main switch rated current
63 A
Number of distributor rows
0
Width
250 mm
Height
1050 mm
Width in number of modular spacings
12
Colour
White
RAL-number
9010
Degree of protection (IP)
Other
With wiring
With mounting plate
The Hager complete metering unit universZ, type ZH3EZ12PN, is a meter cabinet with two meter positions (ZP) and a construction height of 1050 mm, designed for installation in photovoltaic surplus feed-in or cascade wiring. The 1-unit metering field is equipped with eHZ connection modules BKE-I and features preparation for the BKE-I data interface OKK. It serves as an integrated solution for energy management systems in residential and commercial buildings, with wiring already integrated. The construction complies with technical requirements according to DIN VDE 0603/1 and DIN 43 870, and mounting is possible as surface, flush, or semi-recessed installation.
Applications
This complete unit is specifically designed for applications in the field of renewable energies, particularly for PV surplus feed-in and cascade wiring. It is suitable for buildings with a maximum rated current of 63 A in the main circuit, meeting the requirements for power supply according to VDE-AR-N 4100:2019-04. The unit is suitable for apartments, commercial buildings, and installations with continuous power supply up to 32 A (10 mm²) or 44 A (16 mm²), for example in PV systems up to 30 kW. The construction also allows integration of tariff and remote control receivers in a 3-point design.
Functions and Equipment in Detail
The metering field features two meter positions for electronic household meters (eHZ) and is equipped with a 5-pole busbar in the lower connection compartment. The busbar has a rated current of 250 A and is designed for connection between different cabinets or with a cable distribution box. The BKE-I connection modules enable standardized meter mounting. The interior consists of a fully plastic-clad interior space, with the rear of the plastic part pre-drilled to facilitate installation. The door is flush with the front, features integrated, adjustable hinges, and can be opened on the right or left side, with an opening angle of 110°. The door lock is achieved via a cam lock, which can optionally be replaced with other locking systems.
Technology Explained Simply
The cabinet construction consists of a housing made of powder-coated, baked, profiled steel sheet with a thickness of 1 mm. Cable entries are provided at the top and bottom via integrated plastic gland plates. The protection rating is defined as protection class 44 according to VDE-AR-N 4100:2019-04, corresponding to protection class II. The housing color is white, RAL 9010. The width is 250 mm, equivalent to the width of 12 partitioning units (PLE). Mounting is done without a mounting plate. The cabinet door features an integrated, adjustable hinge, allowing flexible installation. Cable entry is via the integrated gland plates, with openings in the lower area that can be opened without tools.
Compatibility and Accessories
The complete unit can be combined with various accessories to extend functionality. These include fitting packages such as ZY02PV for universZ 1ZP/PV, ZY12PV for PV surplus feed-in, or ZY14AEHZ for requirements according to §14a EnWG for EHZ with RfZ. Other compatible components include the ZM15H S-busbar connector for 5-pole connections, the ZU96EZ meter carrier plate for 450 mm, and the ZZ35S cover strip for 12 PLE. Combining these accessories allows application-specific adaptation of the meter cabinet to respective technical and regulatory requirements.
Mounting and Installation
Mounting is performed as surface, flush, or semi-recessed installation. Cable entry is via the integrated gland plates at the top and bottom. The main cable must be introduced into the lower connection compartment from below or sideways and connected according to VDE-AR-N 4100:2019-04. The cabinet door can be opened on the right or left side, with hinges that are adjustable. Cabinet housings can be flanged side by side or stacked vertically to realize larger installations. Wiring is already integrated, so no additional connection work is required.
Operational Advantages
The complete unit offers a pre-fabricated, standardized solution for installing meters in modern energy supply systems. The integrated wiring and preparation for the BKE-I data interface OKK reduce installation time and increase reliability. The use of eHZ connection modules ensures compatible and secure meter mounting. Protection class 44 and protection class II ensure safe operation. Compatibility with various accessories enables flexible adaptation to different requirements, particularly in the field of renewable energies and energy management systems.