Further information for Hager ZH3ET51W meter cabinet 1-field
General
Model
eHZ
Number of meter cabinets
1
Lower connection space
With bus bar 5-pole
Main switch rated current
63 A
Number of distributor rows
0
Width
250 mm
Height
1050 mm
Width in number of modular spacings
12
Colour
White
RAL-number
9010
Degree of protection (IP)
Other
With wiring
With mounting plate
The ZH3ET51W meter cabinet from Hager is a complete unit of the universZ series, designed for the installation of an electronic household meter (eHZ) in a meter position. The device is designed as a 1-unit module, with a total height of 1050 mm and a width of 250 mm, equivalent to a width of 12 partition units. The unit is finished in white, corresponding to RAL number 9010, and is designed for installation in residential buildings with a standard household load class up to 63 A. The construction includes a lower connection compartment with a 5-pole busbar intended for wiring. The busbar feed terminal is rated for cross-sections up to 35 mm², while the meter access and output cables each have a cross-section of 10 mm². The busbar connection type is suitable for linking between different cabinets or with a cable distribution box, with flanges on both sides that can be opened without tools.
Applications
This meter cabinet is designed for installation in residential buildings, particularly for apartments, general consumption purposes, reserves, or heat pumps. It complies with the technical connection conditions (TAB) of VNB and is designed for supply systems with a maximum rated current of 63 A (10 mm²) according to DIN 18015-1. The application is for TN-S network configurations, where the main cable must be introduced from below or from the side into the lower connection compartment and connected in accordance with VDE-AR-N 4100:2019-04. The construction is intended for surface mounting, flush mounting in the wall, or partial flush mounting in the wall.
Functions and Equipment in Detail
The device features an integrated main switch with a rated current of 63 A. The equipment includes a meter position for an eHZ meter, with the number of empty positions also specified as 1. The interior lining consists of a fully plastic-enclosed interior, ensuring a clean and insulated environment for electrical components. The cabinet door is flush-mounted to the front, with internal, adjustable hinges allowing an opening angle of 110°. The door can open to the left or right and is fitted with a latch lock, which can optionally be replaced with other locking systems. The cabinet construction consists of a housing made of powder-coated, baked, stable profiled steel sheet with a thickness of 1 mm.
Technology Explained Simply
The busbar in the lower connection compartment is 5-pole and serves for the distribution of electrical energy. The 5-pole configuration includes conductors L1, L2, L3, N, and PE, which is necessary for safe and orderly distribution in a 3-phase network. The busbar feed terminal allows secure fastening of the supply cable with a cross-section up to 35 mm². The connection cross-sections for the meter access and output cables are each 10 mm², which is sufficient for most residential applications. The cabinet construction allows flanged mounting side-by-side or stacked, enabling flexible expansion of the distribution system.
Compatibility and Accessories
The meter cabinet is designed for use with electronic household meters (eHZ). It is part of a comprehensive system that also enables integration of tariff and remote control receivers (RES, BKE-I, OKK) as well as SLS switches (e.g., Hager HTS3xxE). The construction is suitable for mounting distributors with or without busbars for feed-in connections. The connection options in the lower section allow linking with other cabinets or cable distribution boxes. The cabinet door can be fitted with various locking systems, with the standard latch lock being replaceable by other variants.
Installation and Mounting
Installation typically takes place in residential buildings, with options for surface mounting, flush mounting in the wall, or partial flush mounting in the wall. The main cable must be introduced from below or from the side into the lower connection compartment and connected in accordance with VDE-AR-N 4100:2019-04. The cabinet door is equipped with internal, adjustable hinges allowing an opening angle of 110°. The door can open to the left or right, enabling flexible installation on various walls. The cabinet construction is designed for flanged mounting side-by-side or stacked, allowing expansion of the distribution system.
Operational Advantages
The meter cabinet offers a compact and fully pre-fabricated solution for meter installation in residential buildings. The integrated busbar and pre-wired connections reduce installation time and increase installation accuracy. The robust construction from 1 mm thick steel sheet and the powder-coated surface ensure long service life and high mechanical stability. The flush-mounted door with adjustable hinges and latch lock ensures secure and user-friendly operation. Compatibility with various additional components such as tariff and remote control receivers, as well as SLS switches, allows flexible adaptation to different requirements.
Protection Rating (IP)
The protection rating of the meter cabinet is IP00, meaning no specific protection class against contact, dust, or water is provided. Installation therefore takes place indoors, where no special environmental conditions such as humidity or dust exposure are present. The cabinet construction is not designed for outdoor use or in damp rooms.
RoHS Compliance
The product is RoHS-compliant, meaning it meets the requirements of the EU directive restricting the use of certain hazardous substances in electrical and electronic equipment. This ensures environmentally compatible manufacturing and disposal of the product.
Standards and Regulations
The meter cabinet complies with the technical connection conditions (TAB) of VNB and the regulations of VDE-AR-N 4100:2019-04. The construction is executed in accordance with DIN VDE 0603/1 and DIN 43 870, ensuring compliance with applicable standards for meter cabinets in Germany. The application is for TN-S network configurations, and installation must follow the applicable regulations for electrical installations.