Hager ZH3EL22N, EAN: 3250617685528

Hager ZH3EL22N meter enclosure 1-field

Installation > Distributor Cabinets > Meter Cabinets

Hager ZH3EL22N meter enclosure 1-field

Lieske Part No. 350301
Mfg Part No ZH3EL22N
EAN-Code 3250617685528
Manufacturer Hager
Here only 1.111,50 EUR
1.322,69 EUR incl. VAT

Further information for Hager ZH3EL22N meter enclosure 1-field

General
ModeleHZ
Number of meter cabinets2
Lower connection spaceWith bus bar 5-pole
Main switch rated current63 A
Number of distributor rows0
Width250 mm
Height1050 mm
Width in number of modular spacings12
ColourWhite
RAL-number9010
Degree of protection (IP)Other
With wiringyes
With mounting plateno
The Hager complete unit universal Z, type ZH3EL22N, is a single-section meter enclosure system with two meter positions, designed for the installation of electrical meters in energy distribution applications. It features a modular interface unit (BKE-I) and an upper cable clamp cap (OKK), enabling structured and clear wiring. The construction is designed for flexible installation, suitable for surface, flush, or semi-recessed mounting, and conforms to dimensions specified in DIN 43 870. The overall height is 1050 mm, width 250 mm, equivalent to 12 division units. The enclosure is made of profiled, powder-coated steel sheet with a thickness of 1 mm, finished in white (RAL 9010). The interior lining is fully made of plastic, ensuring a clean separation between metal and plastic components.

Applications
This complete unit is designed for housing and protecting electrical meters, particularly eHZ meters (electronic household meters). It is suitable for apartments, general consumer installations, reserve connections, and installations with heat pumps. The maximum rated current is 63 A, sufficient for typical household consumption. The construction meets the requirements of VDE-AR-N 4100:2019-04 and is therefore suitable for use in supply networks with TN-S configuration. The meter positions are designed for mounting meters with 3-point fixation (3HZ) or eHZ meters.

Functions and Equipment in Detail
The unit features a lower connection compartment equipped with a 5-pole busbar. The busbar has a width of 5 mm and a height of 12 mm. The connection cross-sections for meter input and output cables are 10 mm². The busbar feed terminal is not provided; connections are made via integrated flanges that can be opened without tools. This allows for easy connection between multiple enclosures or with a cable distribution box. Cable entry is via integrated plastic flanges at the top and bottom of the enclosure.

Technology Explained Simply
The protection rating IP00 means the unit offers no special protection against foreign objects or water. It is therefore intended for indoor use where no direct exposure to moisture or dust is expected. Protection class II is ensured by the enclosure insulation, eliminating the need for earthing. The door is flush with the front connection, features adjustable internal hinges, and can be opened on the right or left side. The opening angle is 110°. The door lock is equipped with a latch mechanism, which can optionally be replaced with other locking systems. Mounting is done via pre-drilled holes on the rear of the plastic component.

Compatibility and Accessories
The complete unit is designed for use with electronic household meters (eHZ). It can be combined with additional modules such as a distribution unit, communication unit, or switching unit. The modular interface unit (BKE-I) enables integration of control and communication components. The upper cable clamp cap (OKK) ensures proper cable routing and securing at the top. The construction allows for tool-free mounting of multiple enclosures side by side or stacked.

Installation and Mounting
Mounting is done via pre-drilled holes on the rear of the plastic component. The supply cable must be introduced into the lower connection compartment from below or the side and connected according to VDE-AR-N 4100:2019-04. The busbar connection is made via integrated flanges that can be opened without tools. The door can be mounted on the left or right side as required. The wiring is designed to ensure a clear and maintenance-friendly installation.

Operational Advantages
The complete unit provides clear cable structuring and simplifies maintenance through the clear arrangement of meter positions and the busbar. The integrated modular interface unit (BKE-I) allows flexible expansion with communication or control components. The upper cable clamp cap (OKK) ensures orderly cable routing. The single-section design with two meter positions is ideal for small to medium-sized apartments or individual installations. The use of plastic for the interior lining reduces the risk of corrosion and increases the service life of the unit.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/350301
qrcode für Hager ZH3EL22N meter enclosure 1-field