Hager ZH33Q5N, EAN: 3250617723336

Hager ZH33Q5N Meter Cabinet 1-field H1050

Installation > Distributor Cabinets > Meter Cabinets

Hager ZH33Q5N Meter Cabinet 1-field H1050

Lieske Part No. 349009
Mfg Part No ZH33Q5N
EAN-Code 3250617723336
Manufacturer Hager
Here only 467,02 EUR
555,75 EUR incl. VAT

Further information for Hager ZH33Q5N Meter Cabinet 1-field H1050

General
Model1-story
Number of meter cabinets0
Main switch rated current63 A
Number of distributor rows0
Width250 mm
Height1050 mm
Width in number of modular spacings12
Cover modelNarrow
ColourWhite
RAL-number9010
Degree of protection (IP)Other
With wiringyes
With mounting plateno
The universZ complete enclosure from Hager, type ZH33Q5N, is a 1-section meter cabinet system with a total height of 1050 mm, specifically designed for use in conjunction with EnBW. It features a 1-section, 1-storey configuration and is designed for the installation of control devices and meters. The enclosure is made of powder-coated, 1 mm thick steel sheet, ensuring a stable and durable construction. The interior lining is fully made of plastic, providing a clean and easy-to-clean surface. The front door is flush-mounted and equipped with adjustable internal hinges, allowing an opening angle of 110°. The door can be mounted on the left or right side and is fitted with a latch lock, which can be replaced with other locking systems if required. The protection rating is IP00, meaning the device is not protected against contact, ingress of foreign objects, or water, and must only be used in protected indoor environments.

Applications
ZH33Q5N is designed for energy distribution and metering in residential and commercial units, particularly in conjunction with the technical connection conditions (TAB) of EnBW. It is suitable for electronic household meters (eHZ) as well as meters with 3-point mounting (3HZ). The design supports requirements for energy distribution with normal household consumption up to 63 A (10 mm²) according to DIN 18015-1. It can also be used for continuous applications up to 32 A (10 mm²) or 44 A (16 mm²) according to VDE-AR-N 4100:2019-04, for example in photovoltaic systems up to 22 kW or 30 kW. The construction allows for surface, flush, or semi-recessed installation, with dimensions complying with DIN VDE 0603/1 and DIN 43 870.

Functions and Equipment in Detail
The complete enclosure features an integrated control device area and is equipped with a 3-point mounting for SG/TRE, enabling the installation of control devices and meters without additional mounting elements. The busbar has a width of 5 mm and is fitted with flange sockets on both sides, which can be opened without tools to connect bus lines between multiple cabinets or in conjunction with a cable distribution box. Cable entry is via integrated plastic flange plates at the top and bottom of the enclosure. In the rear area of the plastic part, there is a pre-drilled surface to facilitate mounting. The rated current of the main switch is 63 A, defining the maximum load capacity of the system.

Technology Explained Simply
The construction of ZH33Q5N is based on a robust steel sheet enclosure with a powder-coated surface in RAL 9010 (white), offering high corrosion resistance and visual elegance. The plastic interior lining ensures a clean separation between metal and electrical components. The IP00 protection rating means the device is not suitable for outdoor or damp environments and must only be installed in protected indoor areas. Mounting is done via the pre-drilled surface in the rear area of the plastic part, ensuring secure fixation. The flange sockets on the sides allow for flexible cabling, especially when connecting multiple cabinets.

Compatibility and Accessories
ZH33Q5N is compatible with various accessories that extend its functionality. These include the cover plate ZU98 for 3-point mounting, the fitting kit ZY3XL for universZ TRE, the insulating caps R10H, the fitting kit ZY3TR for SG position with voltage supply and DII, the meter screws N94N, the connecting cable Y90E (4 mm², 200 mm), and the fitting kit ZY14A3P for §14a EnWG with 3-point HZ. Additionally, the control signal terminal strip ZY14AKB for §14a EnWG is available. These components allow for application-specific adaptation of the meter cabinet to meet specific technical requirements.

Installation and Mounting
Mounting is done via the pre-drilled surface in the rear area of the plastic part. The device can be installed in surface, flush, or semi-recessed configuration. Cable entry is via the integrated flange plates at the top and bottom. Bus lines can be connected via the tool-free opening flange sockets on the sides of the enclosure. The main cable must be introduced from below or sideways into the lower connection area of the meter cabinet according to VDE-AR-N 4100:2019-04 and connected there. The cabinets can be flanged side by side or stacked, enabling modular expansion.

Operational Advantages
The universZ complete enclosure offers clear structuring of energy distribution and metering. The integrated 3-point mounting for SG/TRE enables quick and secure installation of control devices. The tool-free opening of the flange sockets simplifies cabling. The construction is suitable for use in modern energy management systems and ensures precise meter readings. The use of RAL 9010 (white) ensures uniform visual design in electrical installations. Compliance with DIN VDE 0603/1 and DIN 43 870 ensures standardized and safe installation.

Color and Surface
The enclosure is powder-coated in white (RAL 9010), providing high corrosion resistance and uniform surface quality. The coating is baked, ensuring durable adhesion and weather resistance. The color is suitable for indoor use and fits into common color concepts for electrical installations.

Standards and Conformity
The product complies with the requirements of VDE-AR-N 4100:2019-04 and is RoHS-compliant. The construction is designed according to DIN VDE 0603/1 and DIN 43 870, ensuring compliance with current technical standards for meter cabinets. The IP00 protection rating is intended for use in protected indoor environments and meets the requirements for electrical safety in such environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/349009
qrcode für Hager ZH33Q5N Meter Cabinet 1-field H1050