Further information for Hager ZH23X7 meter cabinet 1ZP H900 mm
General
Model
1-story
Number of meter cabinets
1
Lower connection space
With bus bar 5-pole
Main switch rated current
63 A
Number of distributor rows
0
Width
250 mm
Height
900 mm
Width in number of modular spacings
12
Cover model
Narrow
Colour
White
RAL-number
9010
Degree of protection (IP)
Other
With wiring
With mounting plate
The Hager universalZ complete meter field ZH23X7 is a single-storey meter field with a height of 900 mm and a width of 250 mm, designed for use in low-voltage energy distribution systems. It features a single meter position and is specifically designed for the requirements of the German federal states of North Rhine-Westphalia, Schleswig-Holstein, Mecklenburg-Western Pomerania, and Lower Saxony, as well as for EON-Mitte. The field is modular in design and allows for space-saving installation, with the width specified in 12 division units (PLE). The housing colour is white, corresponding to RAL number 9010, and the housing is made of profiled, powder-coated steel sheet with a thickness of 1 mm. The interior lining is fully made of plastic, ensuring a clean and corrosion-resistant interior design.
Applications
This meter field is intended for installation in residential and commercial buildings, particularly for systems with a maximum rated current of 63 A. It is suitable for electronic household meters (eHZ) as well as for meters with 3-point mounting (3HZ). Installation is in accordance with the technical connection conditions (TAB) of VNB and VDE-AR-N 4100:2019-04. Use is intended for supply systems with normal household load class up to 63 A (10 mm²) according to DIN 18015-1, as well as for continuous applications up to 32 A (10 mm²) or 44 A (16 mm²) in photovoltaic systems up to 30 kW. The meter fields can be flanged side-by-side or stacked, enabling flexible expansion of the distribution unit.
Functions and Equipment in Detail
The meter field features a lower connection compartment equipped with a 5-pole busbar. The busbar has a height of 12 mm and a width/thickness of 5 mm. The connection cross-sections for the meter access and meter output cables are each 10 mm². The busbar feed terminal is not present, so the feed is via the flange sockets, which can be opened without tools. Cable entry is via integrated plastic flange plates on the top and bottom of the housing. The rear side of the plastic part is pre-drilled to facilitate easy installation. The door is flush-mounted, fitted with internal, adjustable hinges, and can be opened on the right or left side, with an opening angle of 110°. Door locking is achieved via a latch, which can be replaced by other locking systems.
Technology Explained Simply
The protection rating IP00 means that the device is neither protected against touch nor against ingress of solid foreign objects or water. It is therefore intended exclusively for indoor use and not suitable for outdoor or damp environments. The rated current of the main switch is 63 A, indicating the maximum current the switch can safely handle. The network configuration is TN-S, indicating a separate neutral and protective conductor system. The busbar is 5-pole, meaning it is designed for connecting phase, neutral, and protective conductors, as well as two additional conductors (e.g. for remote control). The construction allows for flanged mounting, enabling multiple meter fields to be combined into a larger distribution unit.
Compatibility and Accessories
The meter field is compatible with electronic household meters (eHZ) and meters with 3-point mounting (3HZ). It can be used in combination with a distribution field or a communication field, with the exact configuration depending on local connection conditions. The wiring is already integrated, so the necessary connections are included in the delivery scope. Installation must comply with VDE-AR-N 4100:2019-04, with the main circuit connection via the lower connection compartment.
Installation and Mounting
Mounting is carried out on a wall or base, with installation possible flush, recessed, or partially recessed. The door can be opened on either side, improving accessibility for maintenance work. Cable entry is via the integrated flange plates on the top and bottom. The mounting plate is not included, so fastening is done directly to the wall or base. The pre-drilled rear side of the plastic part facilitates installation. The flange sockets on the sides of the lower connection compartment allow connection to other meter fields or a cable distribution box set.
Operational Advantages
The meter field offers a compact and modular design, enabling flexible expansion. The integrated wiring and 5-pole busbar reduce installation time and increase connection reliability. The flanged mounting allows for neat and orderly arrangement of multiple meter fields. The use of plastic for the interior lining ensures high corrosion resistance and facilitates cleaning. The door with adjustable hinges and latch ensures safe and user-friendly operation.
Protection Rating and Compliance with Standards
The device complies with the requirements of VDE-AR-N 4100:2019-04 and is RoHS-compliant. The protection rating IP00 is intended for indoor use, with no additional protective measures against touch or moisture required. The construction is designed for use in energy distribution systems, with the TN-S network configuration and a rated current of 63 A forming the technical basis for application. The white colour (RAL 9010) ensures visual harmonization with other distribution elements in the building.