The ZB34APZ2 from Hager is a meter complete enclosure from the universZ series, designed for electrical distribution in buildings with flexible and expandable energy requirements. The enclosure has dimensions of 1100 mm height, 1050 mm width, and 205 mm depth, and is suitable for surface, recessed, or semi-recessed mounting. It features a protection rating IP44, providing protection against foreign objects and splashing water, and is therefore suitable for indoor areas with increased humidity or outdoor use with protected installation. The color is white, corresponding to RAL number 9010, and the enclosure is made of profiled, powder-coated steel sheet with a thickness of 1 mm, ensuring stability and corrosion protection.
Applications
The enclosure is designed for electrical energy distribution in residential and commercial buildings, particularly in installations with a rated current up to 63 A. It is intended for the installation of electronic household meters (eHZ) or meters with 3-point mounting (3HZ). The construction complies with the technical connection conditions (TAB) of VNB and the standards DIN VDE 0603/1 and DIN 43 870. The installation width is 1050 mm, the installation height is 1100 mm, and the installation depth is 205 mm. The enclosure door is flush-mounted, equipped with adjustable internal hinges, and can open on the left or right, with an opening angle of 110°. The door is fitted with a latch lock, which can optionally be replaced with other locking systems.
Functions and Equipment in Detail
The enclosure features 5 distribution rows and 4 fields, with the distribution units divided into 72 to 540 PLE (place strip units). In the lower connection area, a 5-pole busbar is integrated, enabling secure and flexible connection of cables. Cable entries are provided at the top and bottom via built-in plastic gland plates. In the rear area of the enclosure, there is a pre-drilled hole in the plastic part, facilitating installation. The busbar sleeves on both sides can be opened without tools, allowing connection between multiple enclosures or with a cable distribution box. Additionally, openings are present in the upper connection area (AAR) and in the RfZ area (for height 1100 mm).
Technology Explained Simply
The protection rating IP44 means that the enclosure is protected against ingress of foreign objects larger than 1 mm and against splashing water from any direction. This makes it suitable for areas where moisture or splashing water may occur, such as kitchens, bathrooms, or exterior walls. The protection class II indicates that the enclosure is double-insulated and does not require a protective earth connection. The rated current of 63 A refers to the maximum current load the enclosure can withstand in continuous operation, while the busbar sleeves are designed for a nominal current of 250 A. The integrated APZ (connection point for meters) and multimedia field support modern communication technologies, such as the integration of tariff and impulse switching devices or communication modules.
Compatibility and Accessories
The enclosure is suitable for mounting SLS switches (e.g., Hager HTS3xxE) and for installing surge protection devices (combination arresters Type 1/2/3). The connection options for powering additional devices are defined according to VDE-AR-N 4100:2019-04, with the voltage tapping possible either before or after the SLS switch, depending on whether a fuse box or an LS switch with 10 A/25 kA is used. The enclosures can be flanged side by side or stacked to create larger distribution systems. The mounting plate is already integrated, simplifying installation.
Installation and Mounting
Installation is carried out within the specified installation width of 1050 mm and installation height of 1100 mm. Cables must be introduced from below or sideways into the lower connection area and connected according to VDE-AR-N 4100:2019-04. The pre-drilled holes in the plastic part facilitate installation. The busbar sleeves can be opened without tools, enabling flexible connection to other enclosures or cable distribution boxes. The door can open on the left or right, allowing adaptation to different room geometries.
Operational Advantages
The enclosure offers a modular and expandable structure, adaptable to growing energy requirements. The integrated multimedia and APZ functions enable integration of modern communication technologies, such as smart metering systems. The robust construction from profiled steel sheet and the IP44 protection rating ensure long service life and high reliability. The tool-free opening of the busbar sleeves and the pre-drilled holes reduce installation time. The enclosure door with adjustable hinges and latch lock provides a secure and flexible access solution.