General
Mounting method	Surface mounted (plaster)
Type of cover	Door
Cover model	Closed
Type of door	Single
Nominal current (In)	0 A
Height	500 mm
Width	1300 mm
Depth	205 mm
Built-in depth	205 mm
Internal depth	205 mm
Plate thickness cabinet	1 mm
Plate thickness door/cover	1 mm
Colour	White
RAL-number	9010
Number of modules	180
Number of rows	15
Width in number of modular spacings	60
Number of openings for flange plates	12
Number of conduit inlets	10
Material housing	Steel
Surface protection	Powder coating
Degree of protection (IP)	IP54
Protection class	II
Impact strength	IK09
Circuit integrity	None
Transparent cover/door
With lock
Extension possible
With mounting plate
Suitable for outdoor use
Suitable for lightning protection

Base cabinet, universZ, 500x1300x205mm, protection class II, IP54, 180 space units. Cabinet housing in accordance with DIN VDE 0603/1, dimensional standard DIN 43 870 for surface-mounted, flush-mounted or partially recessed installation. For setting up a meter distribution system up to 355 A, rated voltage 230/400 V 50 Hz. Protection class IP31 (IP44/IP54 in accordance with DIN VDE 0470/1), protection class II protectively insulated, protection class IP3X behind the door. Consists of a cabinet with door made of powder-coated, baked-on, stably profiled 1 mm thick sheet steel. Interior lining made entirely of plastic. Cable entries at the top and bottom through built-in plastic flange plates, rear pre-punching in the plastic part and busbar bushings as side pre-punching on both sides in the lower area. Door flush with the front with internal, adjustable hinges, can be opened on the right or left with an opening angle of 110°. Door lock with sash, from a width of 800 mm and for all cabinets from a height of 1250 mm with three-point locking. Door lock can be replaced with other locks. Cabinets can be flanged next to each other and one above the other. Cabinet size 1 to 5 fields with 72 to 540 space units (PLE).