General
Mounting method	Pedestal (in-ground mounting)
Type of cover	Door
Cover model	None
Type of door	Single
Height	1355 mm
Width	780 mm
Depth	315 mm
Built-in depth	160 mm
Internal depth	212 mm
Plate thickness cabinet	3.5 mm
Plate thickness door/cover	3.5 mm
Colour	Grey
RAL-number	7035
Number of modules	288
Number of rows	8
Width in number of modular spacings	36
Number of openings for flange plates	3
Number of conduit inlets	3
Material housing	Plastic
Surface protection	Untreated
Degree of protection (IP)	IP44
Degree of protection (NEMA)	Other
Protection class	II
Impact strength	IK10
Circuit integrity	None
Quality class of housing material	Other
Type of coating	Other
Transparent cover/door
With lock
Extension possible
With mounting plate
Suitable for outdoor use
Suitable for lightning protection

Cable distribution cabinet, for universN, 1355 x 780 x 315mm. Cable distribution cabinet in accordance with DIN EN 61439, protection class IP 44, made of glass fiber reinforced polyester FS 833.5 in accordance with DIN EN 14598. Cable distribution cabinet as empty cabinet, prepared for the installation of univers N. Profiled housing in rib design. Door with opening angle of 180 degrees when free-standing and 90 degrees when connected to a row. Right door can be removed. Locking with swivel lever, three-point bascule lock, double locking, a profile half cylinder is installed. Size 2 cabinets can be fitted with two independently lockable doors. Ventilation takes place via labyrinth-like ventilation ducts and is puncture-proof due to the ingress of foreign bodies.
Note: Depending on the model, the cable distribution cabinet can be permanently mounted with a buried base, floor-mounted base or wall bracket (for indoor use only). For cable distribution cabinets with a busbar system, the free assembly areas must be provided with a contact protection cover.