Hager Y90E, EAN: 4010330562600

Hager Y90E Connection Cable 4 mm² 200 mm

Installation > Distributor Cabinets > Meter Cabinets

Hager Y90E Connection Cable 4 mm² 200 mm

Lieske Part No. 355705
Mfg Part No Y90E
EAN-Code 4010330562600
Manufacturer Hager
Here only 7,69 EUR
9,15 EUR incl. VAT

Further information for Hager Y90E Connection Cable 4 mm² 200 mm

General
Number of poles1
The connection cable Y90E from Hager is a specified cable component for use in electrical installations, particularly in meter enclosures and distributors. It is a single-pole cable with a conductor cross-section of 4 mm² and a length of 200 mm. The type code NSGAFOEU identifies the technical configuration and is relevant for identification in the trade. The cable serves for safe and reliable connection of electrical components within distribution systems, with the specific design tailored to the requirements of electrical installation.

Connection cable is the central term for this product, as it primarily serves for electrical connection between components. The length of 200 mm allows precise adaptation to distances within enclosures or distributors, while the cable strength of 4 mm² ensures sufficient current transmission for medium to high loads. The pole count 1 means it is a single-pole cable, intended for connecting individual phases or neutral conductors in an electrical system. The construction is designed to meet requirements for mechanical strength and electrical conductivity in installation technology.

Technical properties include the defined conductor cross-section of 4 mm², suitable for stable current conduction at loads up to certain ampere values. The length of 200 mm is designed for use in compact distribution systems, where an excessively long connection would be unnecessary and an overly short one insufficient. The specification type NSGAFOEU serves for unique product identification in the manufacturer's catalogue and among specialist retailers. The cable is RoHS-compliant, meaning it complies with European regulations restricting certain hazardous substances in electrical and electronic equipment, and is therefore approved for use in the EU.

Application areas lie in the field of electrical installation, particularly in meter enclosures, distributors, and other switching systems, where a reliable and durable electrical connection is required. The cable is typically used between fuses, switches, meter connection points, or other components to ensure secure power supply. The specific length and cross-section are tailored to requirements in residential and building electrical systems.

Compatibility and accessories refers to use in systems compatible with the Hager product range. The connection cable Y90E can be used in combination with other Hager distributor components, such as fuse holders, switches, or meter connection boxes. The type designation NSGAFOEU enables unique identification in the trade and during ordering.

Mounting and installation is performed by simply inserting the cable into the corresponding connection terminals or connection points within the distributor. The length of 200 mm allows precise positioning without unnecessary excess length, which could cause confusion or mechanical stress. The connection is made via mechanical clamp connections, typically tightened with a screwdriver or a special tool. Mounting requires no special tools or special preparations, as the cable is standardized.

The connection cable is designed for use in electrical distribution systems, with the length of 200 mm and the conductor cross-section of 4 mm² being the main features. The pole count 1 defines the electrical function, and the RoHS compliance ensures environmental compatibility. The cable is suitable for use in meter enclosures and distributors, where a reliable electrical connection is required. The type designation NSGAFOEU serves for unique identification in the trade.

Operational advantages lie in the standardization and reliability of the connection. The cable is designed for use in electrical installation and meets the required technical standards. The length of 200 mm allows precise adaptation to distances within enclosures, ensuring proper and safe mounting. RoHS compliance ensures suitability for use in the EU and compliance with current environmental regulations.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/355705
qrcode für Hager Y90E Connection Cable 4 mm² 200 mm