Hager Y88M, EAN: 4010330561870

Hager Y88M Branch Cable Assembly 5-pole 10 mm²

Installation > Distributor Cabinets > Meter Cabinets

Hager Y88M Branch Cable Assembly 5-pole 10 mm²

Lieske Part No. 400524
Mfg Part No Y88M
EAN-Code 4010330561870
Manufacturer Hager
Here only 33,34 EUR
39,67 EUR incl. VAT

Further information for Hager Y88M Branch Cable Assembly 5-pole 10 mm²

General
Number of poles5
The Hager branch cable assembly type Y88M is a 5-pole cable assembly for use in meter enclosures and distributors. It serves as an inlet and outlet cable assembly for single-tier mounting plates and is specifically designed for mounting kits with 2- or 4-row arrangements. The cables are equipped with a conductor cross-section of 10 mm², enabling reliable power supply for electrical installations. The number of poles is 5, with the conductors assigned as L1, L2, L3, N, and PE. The cable ends are fitted with pins to ensure a secure connection. The colour coding complies with standards: three conductors in brown (L1, L2, L3), one conductor in blue (N), and one conductor in green-yellow (PE). The individual cable lengths are 575 mm for the phase conductors (L1, L2, L3), 1100 mm for the neutral conductor (N), and 1100 mm for the protective earth conductor (PE). The cables are made from VDE-approved material (H07V-K), ensuring high quality and safety. The configuration is in the H/H variant, indicating the type of cable end termination.

Applications

The branch cable assembly Y88M is intended for use in electrical distributors and meter enclosures, particularly in mounting kits with 2- or 4-row mounting plate arrangements. It is suitable for installations where a stable and secure connection between the distributor and connected devices or lines is required. The cables are designed for indoor use and meet the requirements for electrical installations in residential and commercial buildings.

Functions and Equipment in Detail

The cable assembly consists of five individual cables, each fitted with a pin to ensure a secure and mechanically stable connection. The conductor cross-sections are 10 mm², providing sufficient current-carrying capacity for typical distributor applications. The cable lengths vary: the three phase conductors (L1, L2, L3) are 575 mm long, while the neutral conductor (N) and protective earth conductor (PE) are each 1100 mm long. These lengths are chosen to allow flexible mounting and connection in various distributor configurations. The colour coding complies with DIN 43870 Part 3, ensuring clear identification of the conductors.

Technology Explained Simply

The cables are made from H07V-K cable type, a VDE-approved material known for its high insulation quality and mechanical strength. The use of a 10 mm² conductor cross-section ensures sufficient current-carrying capacity and minimizes heat losses. The pin termination at the cable ends enables a secure and durable connection that remains stable even under mechanical stress. The different cable lengths (575 mm for L1, L2, L3 and 1100 mm for N and PE) account for varying installation requirements in distributors, with the longer cables for neutral and protective earth conductors ensuring easy connection even in complex arrangements.

Compatibility and Accessories

The branch cable assembly Y88M is specifically designed for mounting kits with 2- or 4-row mounting plate arrangements. It is therefore compatible with distributor and meter enclosure systems that support these configurations. Use in single-tier mounting plates is intended, simplifying installation in standardized distributor enclosures.

Installation and Mounting

Mounting is done by connecting the cables to the corresponding connection points in the distributor or meter enclosure. The pins at the cable ends allow for easy and secure connection. The different cable lengths (575 mm for phase conductors, 1100 mm for N and PE) facilitate adaptation to various mounting geometries. The cables are designed for indoor use, with no specific environmental conditions such as high humidity or extreme temperatures specified. Installation follows standard procedures for electrical distributor systems, with DIN 43870 Part 3 to be observed for colour coding and conductor assignment.

Operational Advantages

The branch cable assembly Y88M provides a reliable and secure power connection in electrical distributors. The use of VDE-approved cable material (H07V-K) and a 10 mm² conductor cross-section ensures high quality and current-carrying capacity. The pin termination provides a mechanically stable connection that holds even under load. The different cable lengths allow flexible installation in various distributor configurations. Colour coding according to DIN 43870 Part 3 simplifies conductor identification and reduces installation errors. Compatibility with 2- and 4-row mounting kits increases applicability in various installation scenarios.

Not Included

The item includes only the branch cable assembly with the specified properties.

Sustainability

The branch cable assembly Y88M is REACh-SVHC free and RoHS compliant, confirming the use of non-hazardous materials and compliance with European environmental regulations for electrical equipment and components. This contributes to the sustainability and environmental compatibility of the installation.

Compatibility

The cable assembly is suitable for mounting kits with 2- or 4-row mounting plate arrangements and is used in single-tier mounting plates. Compatibility with these systems enables flexible use in various distributor configurations.

Conclusion

The Hager branch cable assembly Y88M is a high-quality product for use in electrical distributors. It offers a secure, standard-compliant, and environmentally compatible solution for power distribution in meter enclosures and similar applications. Its clear structure, distinct colour coding, and flexible mounting options make it a reliable component in electrical installations.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/400524
qrcode für Hager Y88M Branch Cable Assembly 5-pole 10 mm²