Hager Y87E, EAN: 4010330561573

Hager Y87E Access Cable Assembly 4-pole 10 mm²

Installation > Distributor Cabinets > Meter Cabinets

Hager Y87E Access Cable Assembly 4-pole 10 mm²

Lieske Part No. 548741
Mfg Part No Y87E
EAN-Code 4010330561573
Manufacturer Hager
Here only 27,45 EUR
32,67 EUR incl. VAT

Further information for Hager Y87E Access Cable Assembly 4-pole 10 mm²

General
Number of poles4
The Hager access cable assembly type Y87E is a 4-pole connection cable assembly for use in meter enclosures and distributors. It is specifically designed for use in electrical distribution systems where a secure and structured connection of cables is required. The cable assembly features a conductor cross-section of 10 mm² and is designed for connections L1, L2, L3, and N. The designation univers Z indicates universal applicability, particularly in standard distributor solutions according to DIN VDE and DIN 43 870. The cable assembly construction enables clear assignment of phases and the neutral conductor, with lengths specified as 675, 700, and 750 mm for individual conductors, indicating a modular design for different enclosure heights. The designation H/H indicates a horizontal arrangement of connections, suitable for mounting in meter enclosures.

Access cable assembly
This item serves as a connecting element between the power supply network and the interior of the distributor. It enables a structured and secure routing of incoming cables into the enclosure, with the 4-pole configuration supporting supply with three phases and a neutral conductor. The use of a 10 mm² cross-section is typical for applications with a maximum current of 63 A in residential buildings or for continuous loads up to 32 A, such as those occurring in photovoltaic systems up to 22 kW. The cable assembly construction is designed so that cables can be directly introduced into the distributor and connected there, with connection points clearly marked.

Functions and equipment in detail
The cable assembly is designed for secure and reliable power supply. The 4-pole construction ensures correct assignment of conductors, thereby avoiding installation errors. The specified lengths of 675, 700, and 750 mm for individual conductors allow adaptation to different enclosure heights, increasing flexibility during installation. The horizontal arrangement (H/H) is optimized for integration into standard meter enclosures, which often require flat, front-parallel mounting. The use of a 10 mm² cross-section meets the requirements for power supply in residential and small consumer installations.

Technology explained clearly
The cable assembly consists of several individual conductors with a cross-section of 10 mm², each designated for phases L1, L2, L3, and neutral conductor N. The lengths of individual conductors vary depending on the connection point, with values of 675, 700, and 750 mm specified. These lengths are chosen to enable secure and orderly connections within the distributor without excessive tension or bending of the cables. The horizontal arrangement (H/H) ensures that cables are routed in a single plane, facilitating installation and maintenance. The 4-pole configuration is standard in three-phase distribution systems and ensures balanced load distribution.

Compatibility and accessories
The cable assembly is designed for use in meter enclosures and distributors executed according to DIN VDE and DIN 43 870. It is compatible with standard distributor solutions requiring a horizontal arrangement of connections. The designation univers Z indicates universal applicability, particularly in systems allowing modular expansion. Use in combination with other components such as busbars or distribution switches is possible, with the exact installation instructions complying with VDE-AR-N 4250-04. The cable assembly construction is designed to fit into the standard mounting openings of meter enclosures.

Installation and mounting
Mounting is performed by inserting the cables into the designated connection points in the meter enclosure. The horizontal arrangement (H/H) requires flat, front-parallel routing of the cables. The lengths of individual conductors (675, 700, 750 mm) are chosen to enable secure connections within the distributor without requiring additional cable extensions or joints. The 4-pole configuration requires correct assignment of phases and the neutral conductor, with conductor markings (L1, L2, L3, N) facilitating correct installation. Mounting must comply with VDE-AR-N 4250-04, particularly regarding connection of cables in the lower connection area.

Operational advantages
The cable assembly provides a structured and secure connection of incoming cables within the distributor. The 4-pole configuration ensures clear assignment of phases and the neutral conductor, preventing installation errors. The use of a 10 mm² cross-section meets the requirements for power supply in residential and small consumer installations. The modular design with variable lengths (675, 700, 750 mm) allows adaptation to different enclosure heights, increasing installation flexibility. The horizontal arrangement (H/H) facilitates installation and maintenance, as cables are routed in a single plane. The construction is designed for reliable and durable use, with materials meeting electrical safety requirements.

RoHS-compliant and REACh-SVHC free
The cable assembly complies with the requirements of the RoHS directive and is free from substances classified as substances of very high concern (SVHC) under REACh regulation. This ensures environmentally compatible manufacturing and use of the product. Compliance with these standards is important for use in electrical installations, particularly regarding product safety and sustainability.

Application areas
The cable assembly is intended for use in meter enclosures and distributors in residential and small consumer installations. It is suitable for applications requiring a 4-pole power supply, such as in multi-family houses, single-family houses, or small commercial enterprises. Use in photovoltaic systems up to 22 kW is possible, with continuous load limited to 32 A. The modular design allows adaptation to different enclosure heights, increasing installation flexibility. The horizontal arrangement (H/H) is optimized for integration into standard meter enclosures.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/548741
qrcode für Hager Y87E Access Cable Assembly 4-pole 10 mm²