Hager Y87A, EAN: 4010330561511

Hager Y87A Access Cable Assembly 4-pole 10 mm²

Installation > Distributor Cabinets > Meter Cabinets

Hager Y87A Access Cable Assembly 4-pole 10 mm²

Lieske Part No. 270883
Mfg Part No Y87A
EAN-Code 4010330561511
Manufacturer Hager
Here only 15,58 EUR
18,54 EUR incl. VAT

Further information for Hager Y87A Access Cable Assembly 4-pole 10 mm²

General
ModelFor 1-story support plates
Nominal cross section10 mm²
Number of poles4
Panel entryStandard
For installation kit1- and 2-rows
Type of cable lugPin
The Hager access cable assembly type Y87A is a universally applicable cable assembly for use in distribution enclosures and meter enclosures. It is specifically designed for single-tier mounting plates and enables orderly and secure distribution of electrical conductors. With a nominal cross-section of 10 mm² and a pole count of 4 (L1, L2, L3, N), it is designed for supplying three-phase networks with a neutral conductor. The cables are available in different lengths: L1, L2, and L3 have a length of 375 mm, while the neutral conductor (N) has a length of 425 mm. This length configuration supports flexible installation options and allows optimal adaptation to the respective enclosure geometry.

Access cable assembly is the product type described here. It serves as a connecting element between the power supply and the interior of the distributor, with the conductors directly connected to the mounting plate. The design for single-tier mounting plates means that the cable assembly is suitable for enclosures with a single mounting level, which is typical for standard distribution installations. The form of the cable lug is designed as pin, ensuring a secure mechanical connection and stable electrical conduction.

Application areas include primarily use in distribution enclosures, especially in meter enclosures, where orderly and secure conductor routing is required. The cable assembly is designed for mounting kits that are either single- or double-row, with compatibility explicitly confirmed for single-row mounting kits. This makes it particularly suitable for standard installations in residential and commercial buildings, where clear separation of conductors and easy maintenance are required.

Functions and equipment in detail include approval for a standard meter access located in the lower area of the enclosure. This access enables direct and secure connection of meter conductors. The use of cables with a cross-section of 10 mm² ensures sufficient current-carrying capacity for typical loads in low-voltage installations. The pole count of 4 (three phases and one neutral conductor) corresponds to the standard for three-phase distributions in Germany and other European countries.

Technology explained simply means that the cable assembly routes the electrical conductors in a defined pattern, with the lengths of individual conductors (L1, L2, L3: 375 mm; N: 425 mm) enabling optimal placement within the enclosure. The pin form of the cable lug ensures a mechanically stable connection that remains secure even under mechanical stress or vibrations. The use of cables with a cross-section of 10 mm² is suitable for safe power supply for loads up to approximately 60 A, which is common in many residential and small business installations.

Compatibility and accessories refers to use with single-row mounting kits, with compatibility explicitly confirmed for this configuration. The specifications relate exclusively to technical fit and electrical connection capability.

Mounting and installation is performed by direct connection to the mounting plate in the distribution enclosure. The cables are pre-formed, so no additional bending or cutting operations are required. The lengths of individual conductors (L1, L2, L3: 375 mm; N: 425 mm) allow flexible adaptation to the respective enclosure configuration. Mounting is typically done by inserting the pin cable lugs into the corresponding connection points on the mounting plate.

Operational advantages lie in the secure and orderly conductor routing, which enables easy maintenance and inspection. The pre-formed cables reduce installation time and minimize the risk of incorrect connections. The use of cables with a cross-section of 10 mm² ensures sufficient current-carrying capacity and minimizes the risk of overheating. The construction is designed for use in standard distribution installations, ensuring high compatibility with common enclosure types.

The information regarding REACh-SVHC freedom and RoHS compliance refers to the materials and environmental compatibility of the product. These standards are mandatory for use in electrical devices and installations in the EU and ensure that no harmful substances are used.

Batteries are not included in the delivery scope.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/270883
qrcode für Hager Y87A Access Cable Assembly 4-pole 10 mm²