Hager XEV1R22T2ER, EAN: 3250610010068

HAGER charging station witty share 22kW OCPP load management - XEV1R22T2ER

HAGER charging station witty share 22kW OCPP load management - XEV1R22T2ER

Lieske Part No. 2024084
Mfg Part No XEV1R22T2ER
EAN-Code 3250610010068
Manufacturer Hager
Here only 1.647,30 EUR
1.960,29 EUR incl. VAT

Further information for HAGER charging station witty share 22kW OCPP load management - XEV1R22T2ER

General
Installation side connection model3-phase
Number of charging units1
Max. power per charging point22 kW
Nominal connection power22 kW
Width250.5 mm
Height549 mm
Depth173 mm
Number of vehicle connectors Type 10
Number of vehicle connectors Type 1 CCS0
Number of vehicle connectors Type 20
Number of vehicle connectors Type 2 CCS0
Number of socket outlets Type 21
Number of vehicle connectors GB AC0
Number of vehicle connectors GB DC0
Number of socket outlets GB0
Number of socket outlets Type 30
Number of vehicle connectors CHAdeMO0
Number of CEE socket outlets1
Number of household socket outlets0
Number of earth leakage circuit breakers type A0
Number of earth leakage circuit breakers type B0
Material housingPlastic
Degree of protection (IP)IP55
Impact strengthIK10
Frequency50 Hz
Input voltage400 V
With house connection boxyes
With circuit breakerno
With energy meteryes
IFTTT support availableno
NFC (Near Field Communication)no
With built-in RFID card readeryes
With displayyes
Witty share charging station up to 22kW, OCPP for load management, RFID, calibration law. Wallbox charging station ER (calibration law compliant) with UV-resistant plastic housing for charging electric or plug-in hybrid vehicles. Mode 3 charging mode according to DIN EN IEC 61851-1 (VDE 0122-1) via Mode 3 socket type 2, secured via the charging station supply line 32 A (3-phase). Permanently installed charging station for indoor/outdoor use. Free use or access authorization via RFID authentication. Consists of
wall housing, cable entry for power supply, brightness sensor, RFID reader (sensor, precise user assignment), LED display (status, charge level, error), MID meter (energy recording), public key for checking the charging process and charging controller with display. The charging controller forms a digital automatic signature. The operating mode (1- or 3-phase) and the charging current (10 - 32 A) are set in the integrated charging controller.
The charging station is connected to a backend system for monitoring and billing via the OCPP protocol. Commissioning is carried out via the embedded web server via WiFi or Ethernet.
The optional load manager (LM) is used to network several charging stations with each other. The load management supports both static and dynamic load management with integrated direct measurement or direct converter connection. The voltage supply of the charging station must have a separate circuit. Connecting several charging stations to the same circuit is not permitted.
Each charging station must be protected with a combined residual current device / circuit breaker (RCBO) type A or separately with a residual current device (RCD) type A and a circuit breaker (MCB). A residual current device type B is not necessary because 6 mA DC residual current detection is integrated.
The charging controller is configured during initial commissioning via the integrated WiFi hotspot or the LAN interface.
Note: A cable holder, RFID cards and feet for freestanding installation are optionally available.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2024084
qrcode für HAGER charging station witty share 22kW OCPP load management - XEV1R22T2ER