Hager XEV1R22T2, EAN: 4012740984102

HAGER charging station witty share 22kW OCPP load management RFID - XEV1R22T2

HAGER charging station witty share 22kW OCPP load management RFID - XEV1R22T2

Lieske Part No. 2051608
Mfg Part No XEV1R22T2
EAN-Code 4012740984102
Manufacturer Hager
Here only 1.250,01 EUR
1.487,51 EUR incl. VAT

Further information for HAGER charging station witty share 22kW OCPP load management RFID - XEV1R22T2

General
Installation side connection model3-phase
Number of charging units1
Max. power per charging point22 kW
Nominal connection power22 kW
Width237 mm
Height549 mm
Depth173 mm
Number of vehicle connectors Type 10
Number of vehicle connectors Type 1 CCS0
Number of vehicle connectors Type 20
Number of vehicle connectors Type 2 CCS0
Number of socket outlets Type 21
Number of vehicle connectors GB AC0
Number of vehicle connectors GB DC0
Number of socket outlets GB0
Number of socket outlets Type 30
Number of vehicle connectors CHAdeMO0
Number of CEE socket outlets0
Number of household socket outlets0
Material housingPlastic
Degree of protection (IP)IP55
Impact strengthIK10
Connectable conductor cross section12 mm²
Frequency50 Hz
Input voltage400 V
With house connection boxyes
With circuit breakerno
With energy meterno
IFTTT support availableno
NFC (Near Field Communication)no
With built-in RFID card readeryes
With displayno
Charging station witty share up to 22kW, OCPP for load management, RFID, charging socket
Wallbox charging station with UV-resistant plastic housing for charging electric or plug-in hybrid vehicles. Charging mode Mode 3 according to DIN EN IEC 61851-1 (VDE 0122-1) via Mode 3 socket type 2, fused via the supply line of the charging station 32 A (3-phase). Permanently installed charging station for indoor/outdoor use. Free use or access authorization via RFID authentication.
Consisting of a wall housing, cable entry for power supply, brightness sensor, RFID reader (sensor) and LED display (status, charge level, error). The operating mode (1 or 3 phase) and the charging current (10 - 32 A) are set in the integrated charging controller.
The charging station is connected to a backend system for monitoring and billing via the OCPP protocol. Commissioning is carried out via the embedded web server via Wifi or Ethernet.
The optional load manager (LM) allows several charging stations to be networked with one another. Load management supports both static and dynamic load management with integrated direct measurement or direct converter connection. The power supply to the charging station must have a separate circuit. Connecting multiple charging stations to the same circuit is not permitted.
Each charging station must be protected with a combined residual current/line circuit breaker (RCBO) type A or separately with a residual current circuit breaker (RCD) type A and a line circuit breaker (MCB). A type B FI circuit breaker is not necessary as a 6 mA DC residual current detection is integrated.
The charging controller is configured when used for the first time via the integrated WiFi hotspot or the LAN interface.
Note: A cable holder, RFID cards and feet for free-standing installation are optionally available.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2051608
qrcode für HAGER charging station witty share 22kW OCPP load management RFID - XEV1R22T2