Further information for Hager WNA685B enclosure bottom 2-way horizontal IP55
General
Assembly arrangement
Surface mounted housing
Number of modules (module system)
2
Number of units
2
Mounting direction
Horizontal
Material
Plastic
Material quality
Thermoplastic
Surface protection
Untreated
Surface finishing
Matt
Colour
White
RAL-number (akin)
9010
Degree of protection (IP)
IP55
Depth
55.7
Diameter
23 mm
Height
76
Number of earthing terminals
1
Number of inlets
4
Shape
Rectangular
Width
147 mm
Suitable for modular domestic switching devices
Halogen free
Transparent
With cover frame included
With duct entry
With cable entry
With screw gland entry
Shock resistant
Inlet from the rear
The Hager housing base WNA685B is a surface-mounted housing for horizontal installation, designed for use in electrical installations. It features two units and is specifically designed for use with W.1 systems. The housing is white in colour (similar to RAL 9010), with a matt, untreated surface made of thermoplastic material. It is halogen-free and complies with the requirements of the RoHS directive and REACh SVHC regulation, enabling its use in sensitive environments.
Applications
This housing base is suitable for indoor use, particularly in areas with higher requirements for protection rating. The IP55 protection rating ensures protection against dust and splashing water, making it suitable for use in damp or slightly soiled environments such as kitchens, bathrooms, or industrial facilities. The operating temperature range is between -15 °C and 30 °C, allowing use in climatically moderate rooms.
Functions and Equipment in Detail
The housing features four cable entries accessible from the rear. These entries are designed for safe and orderly cable routing. The rear of the housing is fitted with a full-surface seal, enabling both rear cable entry and plaster compensation. The housing includes a cover frame, allowing for clean optical integration into the wall. Installation is horizontal, with a mounting depth of 65 mm.
Technology Explained Simply
The housing is made of thermoplastic material, known for its mechanical stability and weather resistance. The impact resistance corresponds to IK07 class, meaning it is protected against mechanical impacts such as light shocks or vibrations. The IP55 protection rating ensures the housing is protected against dust and splashing water, making it suitable for use in damp or slightly soiled environments. The surface is matt and untreated, allowing for easy cleaning and good integration into standardised installation systems.
Compatibility and Accessories
The housing is specifically developed for use with W.1 systems, which are used in modular installation systems. It is not intended for modular installation switch programmes, but serves as a base for mounting switches or socket outlets. The four cable entries allow for flexible cabling, with entries from the rear. The use of cable glands is not intended, as no gland entry is provided.
Installation and Mounting
Installation is horizontal on surface, with a mounting depth of 65 mm to be considered. The full-surface seal on the rear supports a clean and watertight connection to the wall, ensuring a secure and aesthetically pleasing installation. The housing is designed for mounting in W.1 systems, with two modules. Dimensions are 147 mm (width), 76 mm (height), and 55.7 mm (depth), with a mounting depth of 65 mm.
Operational Advantages
The housing provides a robust and reliable base for mounting electrical components. The IP55 protection rating and IK07 impact resistance increase the service life and safety of the device. The four cable entries allow for flexible and secure cabling, while the full-surface seal ensures a clean and watertight installation. The use of halogen-free material and compliance with RoHS and REACh increase the environmental compatibility and safety of the product.