Further information for Hager WLN5029WG temperature controller Wem. switch
General
Model
On/Off
Type of power supply
230 V AC
Connection
3-wire
Thermal feedback
Series
Control characteristic
Other
Number of heater outputs
1
Number of cooler outputs
1
Differential value
0.5 K
Sensor/feeler type
Bimetal
Mounting method
Flush mounted (plaster)
Number of modules (module system)
0
Operation
Turn
Max. contact voltage
230 V
Max. contact load
5 A
Degree of protection (IP)
IP20
Degree of protection (NEMA)
1
Colour
White
RAL-number
9010
Height
71 mm
Width
71 mm
Depth
50 mm
Diameter
71 mm
Class of the temperature control
I
Standby power consumption (solstandby)
0 W
Contact type
Change-over contact (NO/NC)
Measuring range
30 °C
With receiver
External sensor
Adjustable differential
Temperature readable
With sound indicator
With display
With tap water circuit
Explosion-proof
IFTTT support available
Suitable for cooling
Suitable for heating
The Hager temperature controller WLN5029WG is a flush-mounted device for controlling heating systems. It features a rotary knob for operation and is designed for a supply voltage of 230 V AC. The configuration is as a changeover contact (NO/NC) with an integrated switch for selecting between heating and cooling, although cooling is stated as not supported. The controller is intended for use in heating systems and operates with a bimetal sensor that detects room temperature. Temperature measurement is in the range of 5 to 30 °C, with the setpoint adjustable within the comfort range. The switching temperature differential is 0.5 K and is not adjustable. Thermal feedback occurs in series, ensuring stable control. The controller is classified in energy efficiency class I.
Applications
This temperature controller is specifically designed for heating systems, particularly for applications with heat pumps. It is suitable for use in residential and commercial rooms where manual temperature control is required. Installation is flush-mounted, with connections made via push-in terminals. The central parts have a diameter of 58 mm, enabling standard installation in typical electrical installations. The protection rating IP20 protects against contact with fingers and larger objects, but not against splashing water or dust — therefore, use is intended for indoor environments.
Functions and Equipment in Detail
The controller features a rotary knob for manual adjustment of the desired room temperature. There is no display integrated, so current temperature indication is not available. The contacts are configured as changeover contacts, allowing them to be used for both switching and feedback purposes. The maximum contact load is 5 A, with a rated current of 2 A. The voltage is 230 V AC at a frequency of 50 Hz. The power consumption in standby mode is specified as 0 W, indicating passive control.
Technology Explained Simply
The bimetal sensor reacts to temperature changes through mechanical deformation, which triggers the switching function via series thermal feedback. The switching temperature differential of 0.5 K ensures the controller does not switch with every minor temperature fluctuation, thereby increasing contact lifespan. The changeover contact configuration allows flexible wiring, for example, for controlling radiators or pumps. The Polar White color (similar to RAL 9010) and glossy surface finish provide an attractive appearance that blends well in modern indoor spaces.
Compatibility and Accessories
The controller is designed for heating systems and can be connected to standard heating components. The push-in terminal connection enables easy and secure wiring. Installation is done without spreader claws, requiring direct mounting into distribution boxes.
Installation and Mounting
Installation is flush-mounted, with device dimensions of 71 mm (height), 71 mm (width), and 50 mm (depth). The central parts with a diameter of 58 mm fit into standard installation boxes. Wiring is done via push-in terminals, enabling secure and quick connections. Installation requires no additional tools or special mounting aids, as the connection method is standardized.
Operational Advantages
The temperature controller provides reliable and simple temperature control for heating systems. The mechanical design with a bimetal sensor ensures stable operation without electronic components, increasing maintenance-free performance. The switching temperature differential of 0.5 K prevents frequent switching and reduces stress on heating components. Energy efficiency class I indicates high efficiency during operation. The Polar White color (RAL 9010) blends visually into modern indoor environments without being obtrusive.