General
Mounting method	Flush mounted (plaster)
Number of rows	4
Width in number of modular spacings	12
Type of cover	Door
Cover model	With notch
Material housing	Other
Height	755.5 mm
Width	348 mm
Depth	94.5 mm
Built-in depth	90 mm
Internal depth	91.5 mm
Colour	White
RAL-number	9010
Degree of protection (IP)	IP30
Type of closure	Other
Built-in height	720 mm
Built-in width	335 mm
Type of door	Single
Transparent cover/door
DIN-rail
With mounting plate
Extension possible
EMC-version
With lock

Multimedia, volta, UPV, 4-row, with slotted sheet steel door. Small flush-mounted installation distributor made of plastic, in accordance with DIN VDE 61439-3, suitable for use in residential buildings in accordance with DIN 18015 and for the installation of protectively insulated VDI components. Protection class IP30, protection class II protectively insulated.
Consisting of: plastic wall box with standard cable clamp, break-out cable entry slide with snap fastening, integrated spirit level and galvanized sheet steel fastening straps. Rotatable cover frame with ventilation door made of sheet steel, powder-coated and baked, with 15 mm plaster compensation. Ventilation door, flush with the front with internal manually operated hinges. Door lock with flush handle recess and automatically folding back handle, door hinge on the right or left without dismantling the cover frame.
Upper connection compartment: Patch panel and DIN top hat rail snapped on insulated to accommodate different communication modules, there are 2 screw fastenings on the patch panel for the required functional equipotential bonding in accordance with DIN EN 50310 (VDE 0800-2-310). Labeling option with enclosed labeling strip for port labeling. Pre-assembled perforated mounting plates made of galvanized sheet steel with 3.2 mm holes are installed. A universal bracket can be hung directly on the perforated plate for screwless fastening of VDI components.
A 3-way protective contact socket (rotatable 90 degrees) is installed in the lower connection compartment. The sockets can be connected directly via a connection terminal. The sockets can be fitted with an enclosed protective contact cover to comply with protection class II.