General
Mounting method	Hollow wall
Number of rows	5
Width in number of modular spacings	12
Type of cover	Door
Cover model	With notch
Material housing	Plastic
Height	880.5 mm
Width	348 mm
Depth	98 mm
Built-in depth	90 mm
Internal depth	91.5 mm
Colour	White
RAL-number	9010
Degree of protection (IP)	IP30
Type of closure	Other
Built-in height	845 mm
Built-in width	314.5 mm
Type of door	Single
Transparent cover/door
DIN-rail
With mounting plate
Extension possible
EMC-version
With lock

Multimedia, volta, HWV, 5-row, with slotted plastic door. Small hollow wall installation distributor made of plastic, in accordance with DIN VDE 61439-3, suitable for use in residential buildings in accordance with DIN 18015 and for the installation of protectively insulated VDI components. Protection class IP30, protection class II protectively insulated.
Consisting of: Plastic wall box with standard cable clamp and break-out cable entry slide with snap fastening, integrated spirit level. Hollow wall fastening with quick-release lever, can be mounted on the side or top/bottom. Rotatable cover frame with ventilation door made of sheet steel with slotted plastic insert for a better WLAN signal, powder-coated and baked, with 15 mm plaster compensation. Ventilation door, flush with the front with internal hand-operated hinges. Door lock with flush handle recess and automatically folding back handle. Door hinge on the right or left without dismantling the cover frame.
Upper connection compartment: Patch panel and DIN top hat rail snapped on insulated to accommodate different communication modules. There are 2 screw fastenings on the patch panel for the required functional equipotential bonding in accordance with DIN EN 50310 (VDE 0800-2-310). Labeling option with enclosed labeling strip for port labeling. Pre-assembled perforated mounting plates made of galvanized sheet steel with 3.2 mm holes are installed. A universal retaining bracket can be hung directly on the perforated sheet for screwless fastening of VDI components.
A 3-way protective contact socket (can be rotated 90°) is installed in the lower connection compartment. The sockets can be connected directly via a connection terminal. The sockets can be fitted with an enclosed protective contact cover to comply with protection class II.
Note: A type 3 surge protection module can be connected directly (not included).