Further information for Hager VA48CN Distribution Box 4x12PLE IP30
General
Mounting method
Surface mounted (plaster)
Number of rows
4
Width in number of modular spacings
12
Type of cover
Door
Cover model
With notch
Material housing
Plastic
Height
640 mm
Width
305 mm
Depth
96.5 mm
Internal depth
92.5 mm
Colour
White
RAL-number
9010
Degree of protection (IP)
IP30
Type of closure
Other
Type of door
Other
Transparent cover/door
DIN-rail
With mounting plate
Extension possible
EMC-version
With lock
Sealable
The Hager VA48CN is a surface-mounted small distributor from the Volta series, designed for installation in residential and commercial buildings. It features a height of 640 mm, a width of 305 mm, and a depth of 96.5 mm, with an internal depth of 92.5 mm. The housing is made of plastic in the colour Pure White (RAL 9010) and is designed for mounting on plastered surfaces. The distributor offers space for 48 module positions, distributed across 4 rows with 12 division units (PLE) each. It is suitable according to DIN 18015 and provides a structured distribution of electrical lines. The protection rating IP30 ensures protection against foreign objects and safe touch installation, with the installation location exclusively intended for indoor use. The maximum power loss is 20.50 W at a temperature difference of 20 K. The rated current is 63 A, and the nominal voltage is 400 V. The device is equipped with an earthing terminal block and a neutral conductor terminal block, with the terminal blocks mounted using snap technology. Cable entry is via pre-formed openings in the rear panel. The protection class is II, and the impact resistance corresponds to IK07. The filament temperature is 650 °C. The device is RoHS-compliant and REACh-SVHC-free.
Applications
The VA48CN is intended for electrical distribution in residential and commercial buildings. It is particularly suitable for installations requiring a structured and secure distribution of circuits. The IP30 protection rating protects against contact with live parts and prevents ingress of foreign objects with a diameter of 2.5 mm or more, making it suitable for indoor environments. The distribution unit is not intended for outdoor use.
Functions and Equipment in Detail
The distributor features 4 rows with 12 PLE each, resulting in a total of 48 module positions. The terminal blocks for earthing (PE) and neutral conductor (N) are integrated and enable a secure and orderly connection of cables. Installation is carried out without a pre-mounted mounting plate, with the device featuring an integrated rear panel with pre-formed cable entries. The cover is a solid plastic part without a door, making the distributor openly accessible. The cover design includes a cutout to facilitate the installation of additional components. The closure is without a lock, and the device is sealable, enabling a secure and documentable installation.
Technology Explained Simply
The IP30 protection rating means the device is protected against ingress of foreign objects with a diameter of 2.5 mm or more and is installed in a touch-safe manner. Protection class II indicates that the device does not require a protective earth connection, being protected by double or reinforced insulation. The IK07 rating for impact resistance means the device is resistant to mechanical impacts up to 1.7 J. The maximum power loss of 20.50 W at a temperature difference of 20 K is a measure of the device’s heat dissipation under operation, which is relevant for planning ventilation and ambient temperature.
Compatibility and Accessories
The VA48CN can be supplemented with various accessories to extend its functionality. These include N- and PE-terminal blocks in various sizes (e.g. KN06N, KN06E, KN18N, KN10E, KN22N, KN26N, KN26E, KN14E), bridges for terminal blocks (e.g. KN99E, KN99N), patch panels (e.g. FZ12MM, FZ12MMO, FZ06MMO), cover strips (e.g. ZZ35S, S35S), sockets (e.g. VZ00AS), and labelling foils (e.g. VZ602). An optionally available steel door (VA48T) can be mounted to close the distributor. The combination with these accessories allows for individual adaptation to specific installation requirements.
Mounting and Installation
Mounting is on plastered surfaces, with the device featuring an integrated rear panel with pre-formed cable entries. It is delivered without a pre-mounted mounting plate, allowing direct wall fixation. The installation requires fastening materials, which are supplied according to the manufacturer’s specifications. The installation is easy to perform, as the pre-formed openings facilitate cable entry. The terminal blocks are mounted using snap technology, enabling quick and secure fastening. The sealable design supports a documented and secure installation.
Advantages in Operation
The VA48CN offers a clear and organised structure for electrical distribution with 48 module positions. The integrated earthing and neutral conductor terminal blocks simplify installation and ensure a secure connection. The IP30 protection rating ensures a touch-safe and protective installation. The sealable design enables a documented and secure mounting. Compatibility with various accessories allows flexible adaptation to different requirements. The device is RoHS-compliant and REACh-SVHC-free, ensuring environmental compatibility and compliance with environmental regulations.