General
Mounting method	Surface mounted (plaster)
Number of rows	3
Width in number of modular spacings	12
Type of cover	Door
Cover model	With notch
Material housing	Other
Height	515 mm
Width	305 mm
Depth	96.5 mm
Internal depth	92.5 mm
Colour	White
RAL-number	9010
Degree of protection (IP)	IP30
Type of closure	Other
Type of door	Single
Transparent cover/door
DIN-rail
With mounting plate
Extension possible
With lock

Multimedia, volta, APV, 3-row, with slotted plastic door.Small surface-mounted installation distributor made of plastic, in accordance with DIN VDE 61439-3, suitable for use in residential buildings in accordance with DIN 18015 and for the installation of protectively insulated VDI components. Protection class IP30, protection class II protectively insulated.
Consists of a plastic base plate with standard cable clamp, ventilation door made of sheet steel with slotted plastic insert for a better WLAN signal, powder-coated and baked in and flush with internal hand-operated hinges. Door lock with flush recessed handle and automatically folding back handle, door hinge on the right or left.
Upper connection compartment: Patch panel and DIN top hat rail snapped on insulated to accommodate different communication modules, there are 2 screw fastenings on the patch panel for the required functional equipotential bonding in accordance with DIN EN 50310 (VDE 0800-2-310). Labeling option with enclosed labeling strip for port labeling. Pre-assembled perforated mounting plates made of galvanized sheet steel with 3.2 mm holes are installed. A universal bracket can be hung directly on the perforated plate for screwless fastening of VDI components.
A 3-way protective contact socket (rotatable 90°) is installed in the lower connection compartment. The sockets can be connected directly via a connection terminal. The sockets can be fitted with an enclosed protective contact cover to comply with protection class II.
Note: A type 3 surge protection module can be connected directly (not included).