General
Mounting method	Surface mounted (plaster)
Number of rows	3
Width in number of modular spacings	12
Type of cover	Door
Cover model	With notch
Material housing	Other
Height	515 mm
Width	305 mm
Depth	96.5 mm
Internal depth	92.5 mm
Colour	White
RAL-number	9010
Degree of protection (IP)	IP30
Type of closure	Other
Type of door	Single
Transparent cover/door
DIN-rail
With mounting plate
Extension possible
With lock

Small V., Volta, APV, 3x12PLE, IP30, door and RJ45 socket.Small installation distributor on the surface made of plastic in accordance with DIN VDE 0603/1 and DIN 43871, as a termination point meter location (APZ) outside the meter cabinet in accordance with application rule AR4101. Surface-mounted distributor APZ consisting of a plastic base plate with cable clamp as standard, DIN top hat rail made of galvanized sheet steel, two perforated mounting plates, RJ45 socket and three pipe ducts for electrical installation pipes (pipe diameter 25 mm). Device cover made of plastic with 46 mm device slot, sealable as standard and three lockable cover strips. Door made of sheet steel, powder-coated and baked. Door flush with the front with internal, manually operated hinges. Door lock with flush-mounted recessed handle and automatically folding back handle. Door hinge on the right or left. Notes: The surface-mounted distributor APZ must be installed close to the meter cabinet. Enclosed pipe feedthroughs for empty pipes (not included) from the meter location to the APZ and from the APZ to the line technology termination point (APL). Door lock and/or safety sockets for power supply can be installed optionally.