| General |
| Type of accessory | Other |
| Material | Plastic |
| Width | 30 mm |
| Height | 15 mm |
| Depth | 60 mm |
The article UZ05A1 from Hager is a hood tower extension for the universN system, extending the installation depth by 15 mm. This component is used to adapt distribution or meter enclosures to different installation depths, particularly when additional space is required for components such as fuses, switches, or busbar connections. The extension is made of polyamide (PA), a robust plastic suitable for electrical installations. Dimensions are 30 mm width, 15 mm height, and 60 mm depth. The delivery includes 4 pieces per package.
Applications
The hood tower extension is used in electrical installations to increase the depth of distributors or meter enclosures in the universN system. This is particularly necessary when components with greater installation height or additional cabling elements require space inside the enclosure. The extension is compatible with the standard dimensions of the universN system and enables clean, tool-free mounting without altering the external enclosure geometry.
Functions and Equipment in Detail
The extension is attached to the hood tower of the enclosure to extend the installation depth by 15 mm. It is made of halogen-free polyamide, which improves fire behavior properties and makes its use in enclosed spaces safer. The material selection ensures high mechanical stability and resistance to environmental influences. The extension is designed for use in distributors and meter enclosures executed according to DIN 43 870 or DIN VDE 0100-534.
Technology Explained Simply
The extension consists of a plastic element that is coupled to the existing hood tower of the enclosure. The depth of 60 mm allows sufficient extension to accommodate components with greater installation height. The height of 15 mm corresponds exactly to the required increase to meet installation requirements. The material polyamide (PA) is suitable for electrical applications as it is electrically insulating, heat-resistant, and mechanically stable. The halogen-free composition reduces the formation of toxic gases at high temperatures.
Compatibility and Accessories
The hood tower extension UZ05A1 is specifically developed for the universN system from Hager. It is compatible with distributors and meter enclosures executed according to DIN 43 870 or DIN VDE 0100-534. The extension is attached to the hood tower, which is already integrated into the enclosure.
Mounting and Installation
Mounting is tool-free onto the existing hood tower of the enclosure. The extension is simply pushed on or inserted, depending on the hood tower construction. The connection is stable and ensures secure fastening. Installation requires no additional tools or mounting aids. The extension is intended for use in distributors and meter enclosures installed in outdoor or indoor environments.
Advantages in Operation
The hood tower extension enables flexible adjustment of enclosure depth without replacing the entire enclosure. This reduces installation costs and mounting time. The use of polyamide ensures high service life and resistance to mechanical stress. The halogen-free composition improves safety in case of fire. The extension is designed for use in distributors and meter enclosures executed according to DIN 43 870 or DIN VDE 0100-534, thus supporting compliance with applicable standards.