Hager UT22B, EAN: 3250616301511

Hager UT22B Distribution Board 1-module 7.5 mm

Installation > Distributor Cabinets > Wall, Stand, distribution systems

Hager UT22B Distribution Board 1-module 7.5 mm

Lieske Part No. 189569
Mfg Part No UT22B
EAN-Code 3250616301511
Manufacturer Hager
Here only 25,27 EUR
30,07 EUR incl. VAT

Further information for Hager UT22B Distribution Board 1-module 7.5 mm

General
ModelDIN rail (top hat rail) 35/7.5 mm
MaterialSteel
Punch shapeRound hole
Material thickness1 mm
Length7.5 mm
Height35 mm
Surface protectionHot dip galvanized
The Hager UT22B busbar is a universally applicable component for field distributors and distribution systems in the electrical installation environment. It is specifically designed for mounting switching devices, fuses, and other components on DIN busbar and provides a stable mounting solution in distribution boxes. The busbar is 11 PLE wide, corresponding to a total width of 198 mm, and features a recessed design with a depth of 31 mm to ensure secure and rear-covered mounting. The busbar is manufactured as an insulated busbar, ensuring electrical isolation between mounted components and the enclosure.

Busbar
The UT22B is designed as a DIN busbar, complying with standards DIN 43870 and DIN VDE 0603/1. The busbar has a height of 35 mm and a depth of 7.5 mm, with a length of 206 mm. The symmetrical design allows for flexible mounting in various distribution configurations. The material thickness is 1 mm, providing sufficient mechanical stability for use in distribution boxes.

Material and Surface
The material is steel, hot-dip galvanized. This surface treatment offers high corrosion protection and is suitable for use in indoor environments as well as in areas with increased humidity. The hot-dip galvanized surface ensures a long service life and prevents rust formation, which is particularly advantageous in humid or industrial environments.

Insulation and Mounting
The busbar is insulated, meaning it is electrically non-conductive and thus enables safe mounting of components without the risk of short circuits or dangerous contact. The recessed design with a depth of 31 mm ensures that mounted components are rear-covered and do not come into contact with the enclosure. The busbar is designed for mounting in field distribution boxes manufactured according to DIN VDE 0603/1 and DIN 43870.

Compatibility and Accessories
The UT22B is compatible with other components of the Hager system, particularly with the UT22C, another insulated busbar for field distributors, which is 1-fold and 7.5 mm high. The combination of both busbars enables flexible and modular design of distribution systems. The busbar is designed for use in distribution boxes with a width of 11 PLE (198 mm), which represents a standard width in electrical installation.

Sustainability and Compliance
The busbar is halogen-free and complies with the requirements of the REACh SVHC regulation and the RoHS directive. The use of halogen-free material reduces fire risk and the formation of toxic gases in the event of a fire.

Applications
The UT22B is used in distribution boxes for residential and commercial buildings, particularly in field distribution systems where secure and insulated mounting of switching and fuse components is required. The busbar is suitable for applications where electrical isolation between components and the enclosure is necessary to ensure installation safety. The recessed design enables clean and orderly mounting, meeting the requirements of VDE-AR-N 4100:2019-04.

Technical Explanation
The busbar serves as a mounting element for electrical components in distribution boxes. The insulation prevents electrical conductivity between mounted components and the enclosure, ensuring safe installation. The recessed design ensures that components are rear-covered and do not come into contact with the enclosure. The hot-dip galvanized surface provides corrosion protection, extending the service life of the busbar. The busbar is designed for mounting in distribution boxes with a width of 11 PLE, which represents a standard size in electrical installation.

Operational Advantages
The UT22B provides a secure and stable mounting for electrical components. The insulation and recessed design enhance installation safety and prevent short circuits. The hot-dip galvanized surface ensures a long service life and prevents rust formation. Compatibility with other components of the Hager system enables flexible and modular design of distribution systems. The busbar complies with applicable standards and directives, ensuring the reliability and safety of the installation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/189569
qrcode für Hager UT22B Distribution Board 1-module 7.5 mm