Further information for Hager UE22PEN Meter Cabinet 300x500 mm PE/N
General
Height
300 mm
Width
500 mm
Depth
110 mm
Number of poles
2
Busbar distance
60 mm
Busbar height
12 mm
Busbar thickness
5 mm
With cover
The Hager UE22PEN is a component for low-voltage distributions in the universN system, designed for mounting in meter enclosures or distributors. With dimensions of 300 mm height, 500 mm width, and 110 mm depth, it offers a compact yet functional space for the installation of busbars. The component is equipped with a rotatable 2-pole busbar carrier for the neutral conductor (N) and the protective earth conductor (PE), enabling flexible arrangement of conductors within the distributor. The rated voltage is 3AC 690 V at 50 Hz, making it suitable for typical industrial and commercial applications. The busbars are designed for a width of 5 to 10 mm, with a spacing of 60 mm and a thickness of 5 mm. The busbar height is 12 mm. The component is made of polyamide (PA) and is available in the colour RAL 9010 (black).
Busbar component
The UE22PEN serves as a structural component in a modular distributor system, particularly in the universN system by Hager. It enables the integration of busbars for the neutral and protective earth conductors, with the rotatable design allowing adaptation to different mounting conditions. The use of polyamide ensures high mechanical stability and heat resistance, which is important for safe operation in electrical distributors.
Functions and equipment in detail
The component is equipped with sealable shock protection covers reinforced by gas pressure injection. This increases mechanical strength and ensures secure coverage of conductive parts, providing shock protection in accordance with applicable standards. The cover is integrated and supplied as part of the unit, simplifying installation and enhancing safety.
Technology explained clearly
The busbars are rated for a nominal current of 800 A, enabling high load capacity for use in distributors with high current demands. The IP rating IP30 provides protection against contact with solid objects ≥2.5 mm and against splashing water, but not against water ingress under direct spray. The design is intended for use in enclosed distributors, not for outdoor applications. The material selection of polyamide (PA) offers high electrical insulation and heat resistance, which is crucial for safety and longevity.
Compatibility and accessories
The component is part of the universN system and can be combined with other components of this system. Compatible accessories include the cover UZ017 for fuse carrier inserts, the partitions UZ30T1 (vertical) and UZ02T1 (horizontal), and the S-busbar insulator profile S941K for CU20x5/20x10 mm. These elements support modular expansion and secure separation of conductors within the distributor.
Mounting and installation
Mounting is performed in a distributor or meter enclosure, with the rotatable design of the busbar carrier allowing adaptation to the specific arrangement. The cover is already integrated, so no additional protective measures are required for shock protection. Compliance with standards DIN EN 61 439-1, -2, -3 and VDE 0660 Part 600-1, -2, -3, as well as DIN 43 870, ensures standard-compliant installation and safe operating conditions.
Advantages in operation
The component offers high mechanical stability due to gas pressure injection and the use of polyamide. The sealable covers enhance safety and prevent unauthorized access. The modular design allows flexible expansion and adaptation to different distributor configurations. Compliance with the mentioned standards ensures reliability and safety during operation.
Compliance with standards
The UE22PEN complies with standards DIN EN 61 439-1, -2, -3 and VDE 0660 Part 600-1, -2, -3, which apply to the construction and operation of low-voltage distributors. Additionally, it meets DIN 43 870 requirements, confirming compliance with technical requirements for distributor components. Conformity with REACh-SVHC and RoHS demonstrates the environmental compatibility of the product.
Safety and environment
The IP30 protection class protects against contact with solid objects ≥2.5 mm and against splashing water, but not against direct water jets. The use of polyamide (PA) and reinforcement via gas pressure injection increases mechanical strength. The product is free of REACh-SVHC substances and RoHS-compliant, confirming environmental compatibility and the use of safe materials.