General
Other bus systems	None
Mounting method	DRA (DIN-rail adapter)
Width in number of modular spacings	4
Number of inputs	0
Switching current (resistive)	6 A
Max. switching power	1380 W
Max. number of venetian-blind outputs	4
Type of current	AC
Degree of protection (IP)	IP20
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Radio frequent bidirectional
Bus connection included
Bus module detachable
Local operation/hand operation
With LED indication
With switch function

Roller shutter/blind actuator 4-way KNX, 230V. Switching output for switching 4 blind outputs. The blind function can be used to adjust the UP/DOWN/STOP movement command and the slat angle. Percentage control of the blind to move to a predefined position. With alarm function to control the blind to a defined position. Safety descent as long as the button is pressed. 64 scene functions per channel. Logic block for controlling the output depending on the result of a logical operation. Preset, lock function, forced control. The device converts the bus information into corresponding commands. The outputs are switched via the system line from the inputs assigned to them. All outputs have a manual control on the device, which can also be locked, as well as a switching status display using an LED and an operating hour counter for each output. The device can be read out using a diagnostic tool. Labeling option directly on the device.