General
Other bus systems	None
Mounting method	DRA (DIN-rail adapter)
Width in number of modular spacings	4
Number of inputs	0
Switching current (resistive)	6 A
Max. switching power	144 W
Max. number of venetian-blind outputs	4
Type of current	DC
Degree of protection (IP)	IP20
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Radio frequent bidirectional
Bus connection included
Bus module detachable
Local operation/hand operation
With LED indication
With switch function

Roller shutter actuator 4-way, 6A / 24V DC, KNX. Switching output for switching 4 roller shutter outputs. The function can be used to execute the UP/DOWN/Stop movement command. Percentage control of the roller shutter to move to a predefined position. The sun protection function can be used in conjunction with an external sensor to control the brightness per room. With alarm function to control the roller shutter to a defined position. Safety descent as long as the button is pressed. 64 scene functions per channel. Logic block for controlling the output depending on the result of a logical connection. Preset, lock function, forced control. The device converts the bus information into corresponding commands. The outputs are switched via the system line from the inputs assigned to them. All outputs have a manual control on the device, which can also be locked, as well as a switching status display using an LED and an operating hour counter for each output. The device can be read out using a diagnostic tool. Labeling option directly on the device.