General
Other bus systems	None
Mounting method	DRA (DIN-rail adapter)
Width in number of modular spacings	6
Max. switching power	14375 W
Output power	2300 W
Max. number of switching contacts	10
Max. switching current	16 A
Rated current	16 A
Rated operating voltage	230 V
Degree of protection (IP)	IP20
Number of digital inputs	0
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Radio frequent bidirectional
Local operation/hand operation
With LED indication
Suitable for C-load
Different phases connectable
Bus connection included
Bus module detachable
Modular expandability

Switching/blind actuator 10/5-way KNX, 16A, C-load. Switching output for switching 10 socket/lighting outputs or 5 blind outputs. To control lighting outputs, you can choose between ON/OFF, timer, safety off, forced control, lock, logic, preset, delay function or 64 scene functions per channel. With toggle function for time or continuous function. The blind function can be used to adjust the UP/DOWN/Stop movement command and the slat angle. Percent control of the blind to move to a predefined position. The sun protection function can be used in conjunction with an external sensor to control the brightness per room. With alarm function to control the blind to a defined position. Safety descent as long as the button is pressed. 64 scene functions per channel. Logic block to control the output depending on the result of a logical connection. Preset, lock function, forced control. The device converts the bus information into corresponding commands. The outputs are switched via the system cable from the inputs assigned to them. All outputs have a manual control on the device, which can also be locked, as well as a switching status display using an LED and an operating hour counter for each output. The device can be read using a diagnostic tool. Labeling option directly on the device.