General
Model	Presence detector
Scan angle	360 °
Optimum mounting height	2.5 m
Max. transmission range sideways	10 m
Max. presence range	78 m²
Max. transmission range frontally	5 m
Mounting method	Surface mounted (plaster)
Connection type	Other
Material	Plastic
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Glossy
RAL-number (akin)	9010
Degree of protection (IP)	IP41
Min. switch-on time	5 s
Max. duty cycle	8 min
Detection angle horizontal	360 °
Pivoting range sensor, horizontal	360 °
Response value luminosity	2000 lx
Width	105
Height	61.3 mm
Min. depth of built-in installation box	0 mm
Constant light control
HVAC-control
Forced switch off
Animal zone
Networkable
Staircase monitoring
Suitable for wireless transmission
Remote operation
With remote control
Response value sensitivity adjustable
Response value luminosity adjustable
With signal unit
Teach-function for response value luminosity
Dim function with dimmer basic element
Antibacterial treatment
Suitable for C-load
Substation input
With alarm function
With connection cable

Presence/motion detector KNX 360°, surface-mounted, detection Ø20m. KNX presence/motion detector surface-mounted for automatic sending of switching commands for lighting and scene control via the KNX bus, depending on heat movement/ambient brightness and is suitable for surface mounting or installation in device installation boxes indoors.
Main functions: increased detection sensitivity in the central presence detection area, adjustable response brightness and daylight control, adjustable follow-up time, master/slave function.
Note: An optional IR hand-held transmitter can control different operating modes (e.g. on/off).