General
Other bus systems	None
Model	Dimming actuator
Mounting method	DRA (DIN-rail adapter)
Width in number of modular spacings	4
Number of outputs	3
Output power	2300 W
Type of load	Universal
Max. control current	50000 mA
Voltage	30 V
Frequency	50 Hz
Degree of protection (IP)	IP30
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Radio frequent bidirectional
Bus connection included
Bus module detachable
Substation input
Local operation/hand operation
With LED indication
Power boost suitable
Parallel-service possible

Switching/dimming actuator 3-way KNX, 1-10V. Switching/dimming actuator for dimming lighting circuits via remote dimmers and electronic ballasts with 1-10V interface. For each channel, the controlled devices can be switched off via a potential-free normally open contact when OFF. A lighting scene control for 8 scenes with preset brightness values is integrated. Dimming speed, brightness when switched on and behavior after a power or bus failure can be adjusted. The switching status of the outputs is sent to the bus via separate feedback objects. The device is also equipped with a manual control that is independent of the bus and cannot be overridden and LED switching status displays.