General
Other bus systems	None
Model	Movement sensor
Mounting method	Surface mounted (plaster)
Material	Other
Material quality	Thermoplastic
Surface protection	Other
Surface finishing	Matt
Colour	White
RAL-number (akin)	9010
Optimum mounting height	4 m
Max. transmission range sideways	8 m
Max. transmission range frontally	12 m
Diameter detection range on floor	16 m
Detection angle vertical	100 °
Detection angle horizontal	360 °
Number of channels	1
Min. switch-on time	30 s
Max. duty cycle	15 min
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Radio frequent bidirectional
Transparent
Bus connection included
Substation input
Creep-under protection
Operation mode switch
Animal zone
Staircase monitoring
Response value luminosity adjustable
Teach-function for response value luminosity
Switch-off delay self-learning

Wireless outdoor motion detector IP55 with LED spotlight, quicklink, white. Wireless outdoor motion detector IP55 with energy-efficient LED spotlight and low standby consumption, can be used as a wireless solution in the 868 MHz range with quicklink radio or integration via KNX radio media coupler into the KNX-TP system. Tool-free quicklink push-button mode using a configuration button with LED display on the device. Used to control lighting in commercial buildings and residential buildings by detecting moving people. Detection range of 220° with creep-under protection for local detection and a range of max. 16 m at a recommended installation height of approx. 2.5 m. Horizontal lens adjustment of +/- 80° and vertical spotlight adjustment of 340° or horizontal 180° possible. Detection using Fresnel lenses. Limitation of the monitoring area possible using the covers supplied. The time delay and brightness value can be set directly on the device by turning the bayonet lock or using the optional remote control or KNX objects. The sensitivity can be set from 20% to 100%. Functions: time delay, brightness value, on/off, holiday, vacation or auto function, reset to reset to factory settings, test mode.