Further information for HAGER TRE521 - radio AP Bwm Batt IP55 Link anthracite
General
Other bus systems
None
Model
Movement sensor
Mounting method
Surface mounted (plaster)
Material
Other
Material quality
Thermoplastic
Surface protection
Untreated
Surface finishing
Matt
Colour
Anthracite
RAL-number (akin)
7016
Optimum mounting height
4 m
Max. transmission range sideways
10 m
Max. transmission range frontally
16 m
Diameter detection range on floor
12 m
Detection angle vertical
100 °
Detection angle horizontal
220 °
Number of channels
1
Switching power
2300 W
Min. switch-on time
30 s
Max. duty cycle
15 min
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Radio frequent bidirectional
Transparent
Bus connection included
Substation input
Creep-under protection
Operation mode switch
Animal zone
Staircase monitoring
Response value luminosity adjustable
Teach-function for response value luminosity
Switch-off delay self-learning
Radio AP motion detector battery IP55, quicklink, anthracite. Radio outdoor motion detector IP55 quicklink for surface mounting as a radio solution in the 868 MHz range with quicklink radio or integration via KNX radio media coupler into the KNX-TP system. Tool-free quicklink push-button mode using configuration button with LED display. Power supply using 3 AAA LR03 1.5V batteries supplied, whereby the configuration remains when the battery is changed. Used to control lighting in commercial buildings and residential houses by detecting moving people. Detection range of 220° with creep-under protection for local detection and a range of max. 16 m at a recommended installation height of approx. 2.5 m. Horizontal lens adjustment of +/- 80° and vertical lens adjustment of +90°/-30° possible. Detection using Fresnel lenses. Limitation of the monitoring area possible using the covers supplied. The time delay and brightness value can be set directly on the device or via an optional remote control or KNX objects. The sensitivity can be set from 20% to 100%. Can be mounted on walls and ceilings. Can be mounted on corners using an optional mounting adapter.