Further information for Hager TGA200 Power Supply 24 VDC 1 A
General
Voltage type of supply voltage
AC
1st secondary output voltage
24 V
Max. output current 1
1 A
Max. output current 2
0 A
Max. output current 3
0 A
Nominal value output voltage 1
24 V
Nominal value output current 1
1 A
Nominal value output current 2
0 A
Nominal value output current 3
0 A
Rated supply voltage at AC 50 Hz
230 V
Rated supply voltage at AC 60 Hz
230 V
Rated supply voltage at DC
24 V
Power consumption
16 VA
Power output
15 W
Type of electric connection
Plug-in connection
Width in number of modular spacings
4
Built-in width
72 mm
Built-in height
68 mm
Width
72 mm
Height
90 mm
Depth
64 mm
SIL according to IEC 61508
1
Performance level acc. EN ISO 13849-1
Level a
Degree of protection (IP)
IP20
Secondary voltage adjustable
Short-circuit-proof
Output voltage stabilized
Stabilized
Rail mounting possible
Modular version
Direct mounting possible
Suitable for safety functions
The Hager TGA200 is a DC power supply for use in enclosures, specifically developed for powering control and automation components in the field of home automation. The device provides a stabilized output voltage of 24 V DC with a maximum output current of 1 A. It is designed for mounting on standard DIN rails and is therefore suitable for use in industrial and commercial electrical installations. The compact design with an installation width of 72 mm and a height of 90 mm enables efficient space utilization in the enclosure. The power supply is designed for operating temperatures between 0 °C and 45 °C and features a protection rating of IP20, making it suitable for use in enclosed, dry rooms.
Applications
The TGA200 is primarily intended for powering components in the KNX system (formerly EIB), which serves as a flexible, upward-compatible installation system for building automation. It enables the intelligent interconnection of various systems such as lighting, heating, blinds, and security technology. The power supply provides the necessary energy for bus participants, which are supplied with power via the bus cable. The use of standard DIN rails simplifies integration into existing enclosures and enables quick installation.
Functions and Equipment in Detail
The power supply operates with a nominal input voltage of 230 V AC at 50 Hz or 60 Hz. The output voltage of 24 V DC is regulated and stabilized to ensure a constant supply to connected devices. The power output is 15 W, with a power consumption of 16 VA. The device is short-circuit proof, ensuring higher safety during operation. Electrical connections are made via QuickConnect push-in terminals, with two 2-pole connections available. These allow for quick and secure connections without tools.
Technology Explained Simply
The TGA200 converts the mains voltage of 230 V AC into a safe, constant direct voltage of 24 V DC. This voltage is required to power KNX participants, which are supplied with energy via the bus cable. The stabilization of the output voltage ensures that connected devices receive a constant voltage even if the input voltage fluctuates. The short-circuit protection safeguards the device and connected components from damage in the event of a short circuit. The use of QuickConnect push-in terminals simplifies installation and maintenance, as no additional tools are required.
Compatibility and Accessories
The power supply is designed for use in the KNX system (formerly EIB) and can be connected to all components that are powered via the bus cable. Wiring is done via a two-wire system, with the red wire for positive and the black wire for negative polarity. The maximum length of the bus cable is 1000 m, with a maximum distance of 700 m allowed between two bus participants. The maximum distance between the power supply and a bus participant must not exceed 350 m. Wiring can be linear, star-shaped, or tree-shaped, with combinations of these topologies permitted.
Mounting and Installation
The TGA200 is designed for mounting on standard DIN rails and can therefore be directly installed in enclosures. The installation width is 72 mm, equivalent to 4 mounting units. Mounting is done by simply clipping onto the DIN rail, with no additional fastening elements required. The installation height is 68 mm, with the overall height of the device being 90 mm. The depth is 64 mm. Installation is tool-free, as connections are made via QuickConnect push-in terminals.
Operational Advantages
The TGA200 provides reliable and stable power supply for KNX systems. The short-circuit protection increases operational safety, while the stabilized output voltage ensures the functionality of connected devices. The compact design and DIN rail mounting enable efficient space utilization in the enclosure. The use of QuickConnect push-in terminals simplifies installation and maintenance. The power supply is RoHS-compliant, ensuring environmental compatibility. The operating temperature range of 0 °C to 45 °C makes the device suitable for indoor use. The power consumption is 16 VA, with a power output of 15 W. The power supply is designed for use in enclosures and is suitable for commercial and industrial applications.